Sledování dilatačních křivek odlitků ze slitin zinku v procesu tuhnutí

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24210%2F07%3A%40KSP0240" target="_blank" >RIV/46747885:24210/07:@KSP0240 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Monitoring of dilatation curves of castings from zinc alloys in the process of solidification

Popis výsledku v původním jazyce

This article deals with monitoring of dilatation curves of the castings from zinc alloys in the process of solidification. Measure with pure zinc was made for comparison zinc and his alloys. The experiments were made by the gravity casting into the mouldfrom CT mixture (water glass and CO2) and by the gravity casting into the metal mould from steel ČSN 19 552 at different starting temperature (20 °C and 200 °C). Measuring was made on the measure apparatus which was built up on the Departament of Engineering Technology in past years. This apparatus is consists of a converter from an analog signal for a digital signal (Polish provenience), a PC and a chase whereon it is a mould with the measuring detector of the dilatation. The mould has shape of roll with a cave for cast of the castings ? 60 x 70 mm. The alloys were casted by the teeming temperature 450 °C and 550 °C.

Název v anglickém jazyce

Monitoring of dilatation curves of castings from zinc alloys in the process of solidification

Popis výsledku anglicky

This article deals with monitoring of dilatation curves of the castings from zinc alloys in the process of solidification. Measure with pure zinc was made for comparison zinc and his alloys. The experiments were made by the gravity casting into the mouldfrom CT mixture (water glass and CO2) and by the gravity casting into the metal mould from steel ČSN 19 552 at different starting temperature (20 °C and 200 °C). Measuring was made on the measure apparatus which was built up on the Departament of Engineering Technology in past years. This apparatus is consists of a converter from an analog signal for a digital signal (Polish provenience), a PC and a chase whereon it is a mould with the measuring detector of the dilatation. The mould has shape of roll with a cave for cast of the castings ? 60 x 70 mm. The alloys were casted by the teeming temperature 450 °C and 550 °C.

Druh

D - Stať ve sborníku

CEP obor

JG - Hutnictví, kovové materiály

OECD FORD obor

—

Projekt

—

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2007

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

TRANSACTIONS of VŠB-TU Ostrava Metallurgical Servis

ISBN

978-80-248-1548-0

ISSN

1210-0471

e-ISSN

—

Počet stran výsledku

6

Strana od-do

157-162

Název nakladatele

Vysoká škola báňská - Technická univerzita Ostrava

Místo vydání

Ostrava

Místo konání akce

Rožnov p.Radhoštěm

Datum konání akce

11. 9. 2007

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—