Oxidation resistance of Fe28Al3Cr0.02Ce and Fe30Al4Cr2.7TiB2 (at.%) in air
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24210%2F10%3A%230001611" target="_blank" >RIV/46747885:24210/10:#0001611 - isvavai.cz</a>
Nalezeny alternativní kódy
RIV/00216208:11320/10:10109426
Výsledek na webu
—
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Oxidation resistance of Fe28Al3Cr0.02Ce and Fe30Al4Cr2.7TiB2 (at.%) in air
Popis výsledku v původním jazyce
The high-temperature oxidation behaviour of Fe28Al3Cr0.02Ce and Fe30Al4Cr2.7TiB2 (in at.%) has been investigated at 900 and 1100 °C for up to 2000 h. in air. The corrosion resistance was determined by measurement of weight gains. After oxidation the surface layer and the scales were analysed by light optical microscopy (LOM), electron probe microanalysis (EDX) and X-ray diffraction (XRD). Parabolic rate constants kp was compared with other Fe3Al alloys. At 900 °C thin oxide scales of both alloys grew according to a parabolic rate law. In the case of oxidation at 1100°C, thicker scales and attack on the surface layer of both alloys were observed.
Název v anglickém jazyce
Oxidation resistance of Fe28Al3Cr0.02Ce and Fe30Al4Cr2.7TiB2 (at.%) in air
Popis výsledku anglicky
The high-temperature oxidation behaviour of Fe28Al3Cr0.02Ce and Fe30Al4Cr2.7TiB2 (in at.%) has been investigated at 900 and 1100 °C for up to 2000 h. in air. The corrosion resistance was determined by measurement of weight gains. After oxidation the surface layer and the scales were analysed by light optical microscopy (LOM), electron probe microanalysis (EDX) and X-ray diffraction (XRD). Parabolic rate constants kp was compared with other Fe3Al alloys. At 900 °C thin oxide scales of both alloys grew according to a parabolic rate law. In the case of oxidation at 1100°C, thicker scales and attack on the surface layer of both alloys were observed.
Klasifikace
Druh
D - Stať ve sborníku
CEP obor
JG - Hutnictví, kovové materiály
OECD FORD obor
—
Návaznosti výsledku
Projekt
—
Návaznosti
Z - Vyzkumny zamer (s odkazem do CEZ)
Ostatní
Rok uplatnění
2010
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název statě ve sborníku
Metal 2010: 19th International metallurgical and materials conference
ISBN
978-80-87294-17-8
ISSN
—
e-ISSN
—
Počet stran výsledku
5
Strana od-do
—
Název nakladatele
TANGER LTD
Místo vydání
Ostrava
Místo konání akce
Roznov Pod Radhostem, CZECH REPUBLIC
Datum konání akce
1. 1. 2010
Typ akce podle státní příslušnosti
EUR - Evropská akce
Kód UT WoS článku
000286658700160