Effect of the cutting tool wear on the ploughing force values

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24210%2F12%3A%230002812" target="_blank" >RIV/46747885:24210/12:#0002812 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Effect of the cutting tool wear on the ploughing force values

Popis výsledku v původním jazyce

The ploughing forces assessment is necessary for monitoring of the cutting tool wear at cutting. It is conditioned by that the ploughing forces are substantially increased with the cutting tool wear increase, and at processing with small uncut chip thicknesses (for example, at micro milling) the ploughing forces can exceed the forces on the front surface. In this connection it is reasonable to execute the cutting tool wear monitoring directly during the cutting process in the dependence on the growth ofthe ploughing forces. In this article the effect of cutting tool wear on the ploughing force values at processing of different materials is investigated. To determine the ploughing forces the extrapolation method on zero cut thickness was used. The experiments were performed at processing of aluminium alloys and structural and stainless steels of different grades.

Název v anglickém jazyce

Effect of the cutting tool wear on the ploughing force values

Popis výsledku anglicky

The ploughing forces assessment is necessary for monitoring of the cutting tool wear at cutting. It is conditioned by that the ploughing forces are substantially increased with the cutting tool wear increase, and at processing with small uncut chip thicknesses (for example, at micro milling) the ploughing forces can exceed the forces on the front surface. In this connection it is reasonable to execute the cutting tool wear monitoring directly during the cutting process in the dependence on the growth ofthe ploughing forces. In this article the effect of cutting tool wear on the ploughing force values at processing of different materials is investigated. To determine the ploughing forces the extrapolation method on zero cut thickness was used. The experiments were performed at processing of aluminium alloys and structural and stainless steels of different grades.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JR - Ostatní strojírenství

OECD FORD obor

—

Projekt

—

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2012

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Strojírenská technologie

ISSN

1211-4162

e-ISSN

—

Svazek periodika

17

Číslo periodika v rámci svazku

1, 2

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

5

Strana od-do

19-23

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—