Control Unit of Pneumatic System with pressure recuperation
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24210%2F24%3A00012671" target="_blank" >RIV/46747885:24210/24:00012671 - isvavai.cz</a>
Výsledek na webu
—
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Control Unit of Pneumatic System with pressure recuperation
Popis výsledku v původním jazyce
It is a control unit of pneumatic system. It allows the recuperation of the pressure. This working sample is a controller that is built on the Arduino micro development board. The unit provides pressure control in two pneumatic elements simultaneously. It is applicable for a variable stiffness seat cushion with two zones or for a variable stiffness orthopaedic mattress with two zones. When adjusting the pressure in each zone, it reduces the amount of pressurised air required by not venting the air out to the atmosphere when the pressure is reduced, but using it to increase the pressure in the adjacent zone if necessary.
Název v anglickém jazyce
Control Unit of Pneumatic System with pressure recuperation
Popis výsledku anglicky
It is a control unit of pneumatic system. It allows the recuperation of the pressure. This working sample is a controller that is built on the Arduino micro development board. The unit provides pressure control in two pneumatic elements simultaneously. It is applicable for a variable stiffness seat cushion with two zones or for a variable stiffness orthopaedic mattress with two zones. When adjusting the pressure in each zone, it reduces the amount of pressurised air required by not venting the air out to the atmosphere when the pressure is reduced, but using it to increase the pressure in the adjacent zone if necessary.
Klasifikace
Druh
G<sub>funk</sub> - Funkční vzorek
CEP obor
—
OECD FORD obor
10201 - Computer sciences, information science, bioinformathics (hardware development to be 2.2, social aspect to be 5.8)
Návaznosti výsledku
Projekt
—
Návaznosti
I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace
Ostatní
Rok uplatnění
2024
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Interní identifikační kód produktu
KSA-2024-16
Číselná identifikace
—
Technické parametry
The core of the controller is an Arduino Micro, which is equipped with terminals for connecting controls, sensors and pneumatic valves. The pressures in both zones are set using buttons or potentiometers. The buttons are connected to digital inputs D5-D8. The potentiometers are connected to analog inputs A0 and A1. The pressure sensors are analog 0-5V in the range -100-100kPa and they are connected to analog inputs A2 and A3. The valves are two-state connected via TLP250 optical isolators. The unit can control five valves, two to fill, two to drain and one is between the zones. Kontaktní osoba Radek Votrubec (radek.votrubec@tul.cz).
Ekonomické parametry
jednotka je součástí většího celku s komerčním potenciálem.
Kategorie aplik. výsledku dle nákladů
—
IČO vlastníka výsledku
46747885
Název vlastníka
Technická univerzita v Liberci
Stát vlastníka
CZ - Česká republika
Druh možnosti využití
P - Využití výsledku jiným subjektem je v některých případech možné bez nabytí licence
Požadavek na licenční poplatek
N - Poskytovatel licence na výsledek nepožaduje licenční poplatek
Adresa www stránky s výsledkem
—