Comparative study of yarn diameter measured by means of a high speed camera

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24410%2F13%3A%230001680" target="_blank" >RIV/46747885:24410/13:#0001680 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Comparative study of yarn diameter measured by means of a high speed camera

Popis výsledku v původním jazyce

In this work, a setup for evaluating the yarn diameter using different measuring devices was built that allows a simultaneous measurement. The setup device used the CTT instrument where the QQM measuring head was mounted on the path of the yarn. The Olympus i-speed 3 high speed camera captured the yarn passes between the QQM and the camera of CTT. A 100 m of the yarn sample (a one minute run) was tested and recorded simultaneously on the three device. A sample was measured separately on Uster Instrument. As a case study, one air-jet yarns produced on two machine produced by two different machine makers were considered. The individual data of yarn diameters taken from the Uster, the CTT, the QQM and from the image taken by the high speed camera were extracted and converted to real values. Time series analysis, spectral analysis, auto-correlation analysis, Hurst exponent and other functions were used to evaluate and compared the behaviour of the yarn diameter.

Název v anglickém jazyce

Comparative study of yarn diameter measured by means of a high speed camera

Popis výsledku anglicky

In this work, a setup for evaluating the yarn diameter using different measuring devices was built that allows a simultaneous measurement. The setup device used the CTT instrument where the QQM measuring head was mounted on the path of the yarn. The Olympus i-speed 3 high speed camera captured the yarn passes between the QQM and the camera of CTT. A 100 m of the yarn sample (a one minute run) was tested and recorded simultaneously on the three device. A sample was measured separately on Uster Instrument. As a case study, one air-jet yarns produced on two machine produced by two different machine makers were considered. The individual data of yarn diameters taken from the Uster, the CTT, the QQM and from the image taken by the high speed camera were extracted and converted to real values. Time series analysis, spectral analysis, auto-correlation analysis, Hurst exponent and other functions were used to evaluate and compared the behaviour of the yarn diameter.

Druh

O - Ostatní výsledky

CEP obor

JJ - Ostatní materiály

OECD FORD obor

—

Projekt

—

Návaznosti

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2013

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů