A STUDY OF MECHANICAL PROPERTIES OF STRETCH FABRIC AND PATTERN CONSTRUCTION TO EVALUATE CLOTHING PRESSURE

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24410%2F16%3A00003772" target="_blank" >RIV/46747885:24410/16:00003772 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

A STUDY OF MECHANICAL PROPERTIES OF STRETCH FABRIC AND PATTERN CONSTRUCTION TO EVALUATE CLOTHING PRESSURE

Popis výsledku v původním jazyce

It could obviously be seen after finding the tension value that stretch fabric value of course direction had an inverse influence on tension value; nevertheless, the extensibility value of wale had no influence on tension value. The results can be concluded that the highest tension value is at bust position and the highest tension was sample number 5 at 24.47 fg/cm. Therefore, the lesser extensibility at course direction is, the higher the value of tension will be, which undeniably corresponded to linear regression and the correlation (R2). At different positions except point mark 1, 5 and 9, R2 were high while others are low. At the same time, the pressure value between a real mannequin and actual body are quite similar. Sample 5 was considered to have high pressure value while sample 7 and 8 had least when wearing which correlated to the percentage of stretch fabric in course direction. This could be concluded that the higher extensibility is the lesser pressure and also lower the value of tension will be on clothing and vice versa.

Název v anglickém jazyce

A STUDY OF MECHANICAL PROPERTIES OF STRETCH FABRIC AND PATTERN CONSTRUCTION TO EVALUATE CLOTHING PRESSURE

Popis výsledku anglicky

It could obviously be seen after finding the tension value that stretch fabric value of course direction had an inverse influence on tension value; nevertheless, the extensibility value of wale had no influence on tension value. The results can be concluded that the highest tension value is at bust position and the highest tension was sample number 5 at 24.47 fg/cm. Therefore, the lesser extensibility at course direction is, the higher the value of tension will be, which undeniably corresponded to linear regression and the correlation (R2). At different positions except point mark 1, 5 and 9, R2 were high while others are low. At the same time, the pressure value between a real mannequin and actual body are quite similar. Sample 5 was considered to have high pressure value while sample 7 and 8 had least when wearing which correlated to the percentage of stretch fabric in course direction. This could be concluded that the higher extensibility is the lesser pressure and also lower the value of tension will be on clothing and vice versa.

Druh

O - Ostatní výsledky

CEP obor

JJ - Ostatní materiály

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů