DESIGNING AND PATTERNMAKING WITH STRETCH FABRICS

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24410%2F16%3A00003776" target="_blank" >RIV/46747885:24410/16:00003776 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

DESIGNING AND PATTERNMAKING WITH STRETCH FABRICS

Popis výsledku v původním jazyce

The results of the simulation has shown on the pattern construction 3D and the virtual mannequin that evaluated amend the tension map gradient results. The colour of tension map when simulated the distribution of 2 types of stretch fabrics had shared similar gradients. However, the results of the value of tension were different by the value of extensibility. The values of fabric elasticity in wale and course direction have an influence on values of tension and the value of the pressure. Obviously, the results of tension simulated by OptiTex were compared with the pressure of prototypes worn by rigid mannequin measured by PicoPress pressure tester. The extensibility values of stretch fabric from 65% PA, 35% Elastane of 31.61 % in wale direction and 21.84 % in course direction. Whereas, tension value of 26.98 fg/cm and pressure value of 9 mmHg at the bust point have no sense of discomfort in the lower garment pressure range (0 – 15 gf/cm2 or 0 - 11.03 mmHg) accounting for garment pressure and comfort sensations. This could be concluded that the lower the extensibility value is, the higher pressure and tension will be and vice versa. It is certain that the extensibility of fabric tension could be evaluated by OpiTitex to adjusted in accordance to the pattern design suitable for tight-fitting clothing.

Název v anglickém jazyce

DESIGNING AND PATTERNMAKING WITH STRETCH FABRICS

Popis výsledku anglicky

The results of the simulation has shown on the pattern construction 3D and the virtual mannequin that evaluated amend the tension map gradient results. The colour of tension map when simulated the distribution of 2 types of stretch fabrics had shared similar gradients. However, the results of the value of tension were different by the value of extensibility. The values of fabric elasticity in wale and course direction have an influence on values of tension and the value of the pressure. Obviously, the results of tension simulated by OptiTex were compared with the pressure of prototypes worn by rigid mannequin measured by PicoPress pressure tester. The extensibility values of stretch fabric from 65% PA, 35% Elastane of 31.61 % in wale direction and 21.84 % in course direction. Whereas, tension value of 26.98 fg/cm and pressure value of 9 mmHg at the bust point have no sense of discomfort in the lower garment pressure range (0 – 15 gf/cm2 or 0 - 11.03 mmHg) accounting for garment pressure and comfort sensations. This could be concluded that the lower the extensibility value is, the higher pressure and tension will be and vice versa. It is certain that the extensibility of fabric tension could be evaluated by OpiTitex to adjusted in accordance to the pattern design suitable for tight-fitting clothing.

Druh

D - Stať ve sborníku

CEP obor

JJ - Ostatní materiály

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

The 21st International Conference STRUTEX

ISBN

978-80-7494-269-3

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

239-244

Název nakladatele

Technical University of Liberec

Místo vydání

Liberec

Místo konání akce

Licerec, Czech Republic

Datum konání akce

1. 1. 2016

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—