Technological Aspect of Mini-thixoforming

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23210%2F11%3A43896707" target="_blank" >RIV/49777513:23210/11:43896707 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Technological Aspect of Mini-thixoforming

Popis výsledku v původním jazyce

Forming in the thixotropic state is one of the alternative forming methods, which allows producing semi-products with relatively complicated shape. The process is based on semi-product forming in the region between solid and liquid, where the material exhibits the thixotropic behavior. This technology applies especially to higher-alloyed steels, which are otherwise processed by pressure casting. Mini-thixoforming runs in the closed die cavity. Among the advantages of this technology belongs the possibility to produce components with complicated shape in one step and to utilize lower forming forces. On the other hand, high forming temperatures and the narrow forming temperature interval can be considered as disadvantages. A die with various cavity shapeand inlet opening geometry was designed and tested under various forming parameters. On the basis of numerical simulation a die for mini-thixoforming with variable cavity shape was changed. X210Cr12 steel was used for the experiments. Af

Název v anglickém jazyce

Technological Aspect of Mini-thixoforming

Popis výsledku anglicky

Forming in the thixotropic state is one of the alternative forming methods, which allows producing semi-products with relatively complicated shape. The process is based on semi-product forming in the region between solid and liquid, where the material exhibits the thixotropic behavior. This technology applies especially to higher-alloyed steels, which are otherwise processed by pressure casting. Mini-thixoforming runs in the closed die cavity. Among the advantages of this technology belongs the possibility to produce components with complicated shape in one step and to utilize lower forming forces. On the other hand, high forming temperatures and the narrow forming temperature interval can be considered as disadvantages. A die with various cavity shapeand inlet opening geometry was designed and tested under various forming parameters. On the basis of numerical simulation a die for mini-thixoforming with variable cavity shape was changed. X210Cr12 steel was used for the experiments. Af

Druh

D - Stať ve sborníku

CEP obor

JG - Hutnictví, kovové materiály

OECD FORD obor

—

Projekt

<a href="/cs/project/1M06032" target="_blank" >1M06032: VÝZKUMNÉ CENTRUM TVÁŘECÍCH TECHNOLOGIÍ</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2011

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

New trends in material technology

ISBN

978-3-86367-008-5

ISSN

—

e-ISSN

—

Počet stran výsledku

4

Strana od-do

9-12

Název nakladatele

Verlag der Gesellschaft für Unternehmensrechnung und Controlling m.b.H.

Místo vydání

Chemnitz

Místo konání akce

Sokolov

Datum konání akce

22. 6. 2011

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—