Mini-thixoforming of Tool Steel X210Cr12

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23210%2F13%3A43920393" target="_blank" >RIV/49777513:23210/13:43920393 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Mini-thixoforming of Tool Steel X210Cr12

Popis výsledku v původním jazyce

Forming in the thixotropic state is one of the alternative forming methods, which allows producing semi- products with relatively complicated shape. The process is based on semi-product forming in the region between solid and liquid, where the material exhibits the thixotropic behaviour. Among the advantages of this technology belongs the possibility to produce components with complicated shape in one step and to utilize lower forming forces. On the other hand, high forming temperatures and the narrow forming temperature interval can be considered as disadvantages. A die was designed for this technology and practical testing was carried out using a range of forming strengths and temperatures. The shape of the hollow was varied to find out fluidity. Steel workpieces of various shapes several millimetres in size were created using this technology. The tool steel X210Cr12 was used for the development of an alternative forming process. The structures were observed using light and laser con

Název v anglickém jazyce

Mini-thixoforming of Tool Steel X210Cr12

Popis výsledku anglicky

Forming in the thixotropic state is one of the alternative forming methods, which allows producing semi- products with relatively complicated shape. The process is based on semi-product forming in the region between solid and liquid, where the material exhibits the thixotropic behaviour. Among the advantages of this technology belongs the possibility to produce components with complicated shape in one step and to utilize lower forming forces. On the other hand, high forming temperatures and the narrow forming temperature interval can be considered as disadvantages. A die was designed for this technology and practical testing was carried out using a range of forming strengths and temperatures. The shape of the hollow was varied to find out fluidity. Steel workpieces of various shapes several millimetres in size were created using this technology. The tool steel X210Cr12 was used for the development of an alternative forming process. The structures were observed using light and laser con

Druh

D - Stať ve sborníku

CEP obor

JG - Hutnictví, kovové materiály

OECD FORD obor

—

Projekt

<a href="/cs/project/GCP107%2F11%2FJ083" target="_blank" >GCP107/11/J083: Vliv vstupní struktury na výsledné vlastnosti materiálu zpracovaného mini-tixoformingem</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2013

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

METAL 2013

ISBN

978-80-87294-41-3

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

341-346

Název nakladatele

TANGER, spol. s.r.o.

Místo vydání

Ostrava

Místo konání akce

Brno

Datum konání akce

15. 5. 2013

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

000333163100051