Durability of the cutting tool with different thin layers when inconel 718 is machined
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23210%2F16%3A43930165" target="_blank" >RIV/49777513:23210/16:43930165 - isvavai.cz</a>
Výsledek na webu
<a href="http://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2015/092.pdf" target="_blank" >http://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2015/092.pdf</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.2507/26th.daaam.proceedings.092" target="_blank" >10.2507/26th.daaam.proceedings.092</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Durability of the cutting tool with different thin layers when inconel 718 is machined
Popis výsledku v původním jazyce
The Inconel 718 alloy exhibits high strength and creep-rupture strength at the high temperatures. These properties are heavily influenced by the heat treatment. Machining, especially milling of this alloy is very difficult to cut because the high strength and hardness at the high temperature are there. The self-hardening is one of the problems, which leads to the enormous tool wear. Productivity of machining is relatively low. This paper is focused on the factors, which have the greatest effect on the cutting tool wear and the machined surface quality, when the Inconel 718 is machined. There is description of these factors and their explanations. The experiment for comparing of three different cutting tool materials is described. The experiment is also focused on the confirmation of the theoretical information.
Název v anglickém jazyce
Durability of the cutting tool with different thin layers when inconel 718 is machined
Popis výsledku anglicky
The Inconel 718 alloy exhibits high strength and creep-rupture strength at the high temperatures. These properties are heavily influenced by the heat treatment. Machining, especially milling of this alloy is very difficult to cut because the high strength and hardness at the high temperature are there. The self-hardening is one of the problems, which leads to the enormous tool wear. Productivity of machining is relatively low. This paper is focused on the factors, which have the greatest effect on the cutting tool wear and the machined surface quality, when the Inconel 718 is machined. There is description of these factors and their explanations. The experiment for comparing of three different cutting tool materials is described. The experiment is also focused on the confirmation of the theoretical information.
Klasifikace
Druh
D - Stať ve sborníku
CEP obor
JR - Ostatní strojírenství
OECD FORD obor
—
Návaznosti výsledku
Projekt
<a href="/cs/project/LO1502" target="_blank" >LO1502: Rozvoj Regionálního technologického institutu</a><br>
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Ostatní
Rok uplatnění
2016
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název statě ve sborníku
Annals of DAAAM and Proceedings of the International DAAAM Symposium
ISBN
978-3-902734-07-5
ISSN
1726-9679
e-ISSN
—
Počet stran výsledku
5
Strana od-do
678-682
Název nakladatele
DAAAM International
Místo vydání
Vienna
Místo konání akce
Zadar
Datum konání akce
21. 10. 2015
Typ akce podle státní příslušnosti
WRD - Celosvětová akce
Kód UT WoS článku
—