Failure analysis of pin joint of carbon/epoxy composite plate

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23520%2F13%3A43916836" target="_blank" >RIV/49777513:23520/13:43916836 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.4028/www.scientific.net/AMR.634-638.2796" target="_blank" >http://dx.doi.org/10.4028/www.scientific.net/AMR.634-638.2796</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.4028/www.scientific.net/AMR.634-638.2796" target="_blank" >10.4028/www.scientific.net/AMR.634-638.2796</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Failure analysis of pin joint of carbon/epoxy composite plate

Popis výsledku v původním jazyce

This paper deals with the failure analysis of a carbon fibre reinforced plastic (CFRP) plate which is joined to a structure using a steel pin. The analysis was carried out experimentally and numerically using the finite element method (FEM) system MSC.Marc. The Puck´s failure criterion for 3D stress state was used after its implementation into the MSC.Marc system. Experimental specimens were symmetrical laminates with 8 layers. A special experimental device which allowed monitoring of all visible changes of the experimental specimens with cameras was designed. This device was installed into the testing machine Zwick/Roell Z050. Obtained images were evaluated using the digital image correlation technique. Moreover, the vibrations in the surroundings of the specimens were measured to detect acoustic emissions which occur during damage.

Název v anglickém jazyce

Failure analysis of pin joint of carbon/epoxy composite plate

Popis výsledku anglicky

This paper deals with the failure analysis of a carbon fibre reinforced plastic (CFRP) plate which is joined to a structure using a steel pin. The analysis was carried out experimentally and numerically using the finite element method (FEM) system MSC.Marc. The Puck´s failure criterion for 3D stress state was used after its implementation into the MSC.Marc system. Experimental specimens were symmetrical laminates with 8 layers. A special experimental device which allowed monitoring of all visible changes of the experimental specimens with cameras was designed. This device was installed into the testing machine Zwick/Roell Z050. Obtained images were evaluated using the digital image correlation technique. Moreover, the vibrations in the surroundings of the specimens were measured to detect acoustic emissions which occur during damage.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20505 - Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics; filled composites)

Projekt

<a href="/cs/project/TA02010501" target="_blank" >TA02010501: Stavebnicový systém mostních konstrukcí z pokročilých kompozitních materiálů</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2013

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

ADVANCES IN CHEMICAL, MATERIAL AND METALLURGICAL ENGINEERING, PTS 1-5

ISBN

978-3-03785-589-8

ISSN

1022-6680

e-ISSN

1662-8985

Počet stran výsledku

4

Strana od-do

2796-2799

Název nakladatele

TRANS TECH PUBLICATIONS LTD

Místo vydání

STAFA-ZURICH

Místo konání akce

Kunming

Datum konání akce

15. 12. 2012

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

000322420401077