Teoretický rozbor řezných podmínek při řezání dřeva tenkým pásem s nožíkovou geometrií zubu.

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60162694%3AG43__%2F07%3A%230000735" target="_blank" >RIV/60162694:G43__/07:#0000735 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/62156489:43410/07:00113918

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Theoretical analysis of the condition of cutting by a bandsaw blade with the knife-shaped geometry of teeth.

Popis výsledku v původním jazyce

The paper presents the theoretical analysis of cutting conditions at sawing wood by a thin bandsaw blade with the knife-shaped geometry of teeth. The principle of sawing when a chip originates is replaced by the principle of cutting. The cutting is carried out by teeth of a saw belt, which are sharpened to the shape of cutting knives. Monitoring the phenomena at this way of cutting is realized on a mobile belt saw Husqvarna SMB 70. In the first stage, the methodology of measurement was proposed with necessary measuring elements. Testing the functionality of the proposed method of measurement was carried out using the traditional toothing of a saw belt. The scheme of the principle of cutting and results obtained are presented in this paper. To model energy elements the saw belt thickness of 1 mm and the cutting speed of a saw belt 35-100 ms-1 are supposed.

Název v anglickém jazyce

Theoretical analysis of the condition of cutting by a bandsaw blade with the knife-shaped geometry of teeth.

Popis výsledku anglicky

The paper presents the theoretical analysis of cutting conditions at sawing wood by a thin bandsaw blade with the knife-shaped geometry of teeth. The principle of sawing when a chip originates is replaced by the principle of cutting. The cutting is carried out by teeth of a saw belt, which are sharpened to the shape of cutting knives. Monitoring the phenomena at this way of cutting is realized on a mobile belt saw Husqvarna SMB 70. In the first stage, the methodology of measurement was proposed with necessary measuring elements. Testing the functionality of the proposed method of measurement was carried out using the traditional toothing of a saw belt. The scheme of the principle of cutting and results obtained are presented in this paper. To model energy elements the saw belt thickness of 1 mm and the cutting speed of a saw belt 35-100 ms-1 are supposed.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

KA - Vojenství

OECD FORD obor

—

Projekt

—

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2007

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Forestry and Wood Technology.

ISSN

0208-5704

e-ISSN

—

Svazek periodika

neuvedeno

Číslo periodika v rámci svazku

61

Stát vydavatele periodika

PL - Polská republika

Počet stran výsledku

7

Strana od-do

263-269

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—