Three-body abrasive wear of polymer mat rix composites filled with Jatropha Curcas L.

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F16%3A70583" target="_blank" >RIV/60460709:41310/16:70583 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.1016/j.proeng.2016.01.192" target="_blank" >http://dx.doi.org/10.1016/j.proeng.2016.01.192</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.proeng.2016.01.192" target="_blank" >10.1016/j.proeng.2016.01.192</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Three-body abrasive wear of polymer mat rix composites filled with Jatropha Curcas L.

Popis výsledku v původním jazyce

Polymers and their composites are widely used for their specific properties. This paper deals with composite materials based on Jatropha Oil Cake. The research was focused on influence of a mass concentration of Jatropha Oil Cake, as the filler in epoxy adhesive, on hardness and abrasion resistance. In the experiments various mass concentrations of Jatropha Oil Cake from 5 to 30% were used. Composite materials were subjected to measurement of Shore D hardness and abrasion resistance of the three-point method according to ASTM - G65. The results were analysed by statistical method ANOVA. Moisture of filler was 4.59 ± 0.22% WB. Results show that composite materials have higher weight loss than the matrix if free abrasives (fraction F60) were applied. When the free abrasives F400 were used, composite material showed comparable results with the matrix. Using of filler had no effect on changes of hardness according to Shore D. The advantage of composite systems based on Jatropha Oil Cake is utilization of

Název v anglickém jazyce

Three-body abrasive wear of polymer mat rix composites filled with Jatropha Curcas L.

Popis výsledku anglicky

Polymers and their composites are widely used for their specific properties. This paper deals with composite materials based on Jatropha Oil Cake. The research was focused on influence of a mass concentration of Jatropha Oil Cake, as the filler in epoxy adhesive, on hardness and abrasion resistance. In the experiments various mass concentrations of Jatropha Oil Cake from 5 to 30% were used. Composite materials were subjected to measurement of Shore D hardness and abrasion resistance of the three-point method according to ASTM - G65. The results were analysed by statistical method ANOVA. Moisture of filler was 4.59 ± 0.22% WB. Results show that composite materials have higher weight loss than the matrix if free abrasives (fraction F60) were applied. When the free abrasives F400 were used, composite material showed comparable results with the matrix. Using of filler had no effect on changes of hardness according to Shore D. The advantage of composite systems based on Jatropha Oil Cake is utilization of

Druh

D - Stať ve sborníku

CEP obor

JR - Ostatní strojírenství

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

20th International Slovak-Polish Conference on Machine Modeling and Simulations

ISBN

—

ISSN

1877-7058

e-ISSN

—

Počet stran výsledku

6

Strana od-do

169-174

Název nakladatele

Procedia Engineering

Místo vydání

Slovakia

Místo konání akce

Vratna Terchova, Slovakia

Datum konání akce

7. 9. 2015

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—