Abrasive wear resistance of selected woods

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F17%3A74077" target="_blank" >RIV/60460709:41310/17:74077 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.17221/74/2015-RAE" target="_blank" >http://dx.doi.org/10.17221/74/2015-RAE</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.17221/74/2015-RAE" target="_blank" >10.17221/74/2015-RAE</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Abrasive wear resistance of selected woods

Popis výsledku v původním jazyce

In this contribution, the results of the wear resistance study of 10 sorts of wood (apple, aspen, beech, hornbeam, horse-chestnut, London plane, mahogany, silver fir, sour cherry and sweet cherry) are published. The laboratory tests were carried out using the pin-on-disk machine when the abrasive clothes of three different grits (240, 120 and 60) were used. The wear intensity was assessed by the volume, weight and length losses of the tested samples. From the results of the carried out tests it follows that the wear resistance of different woods is different. It was proved that the wear resistance of different woods depends on the abrasive particles size, too. Also the technical-economical evaluation was part of the carried out tests. It was univocally proved that at the intensive abrasive wear using the abrasive cloth the best results were shown by hard woods, e.g. apple, beech or mahogany. Soft woods, e.g. horse-chestnut, silver fir or sweet cherry, are cheap, but their wear is bigger compared to h

Název v anglickém jazyce

Abrasive wear resistance of selected woods

Popis výsledku anglicky

In this contribution, the results of the wear resistance study of 10 sorts of wood (apple, aspen, beech, hornbeam, horse-chestnut, London plane, mahogany, silver fir, sour cherry and sweet cherry) are published. The laboratory tests were carried out using the pin-on-disk machine when the abrasive clothes of three different grits (240, 120 and 60) were used. The wear intensity was assessed by the volume, weight and length losses of the tested samples. From the results of the carried out tests it follows that the wear resistance of different woods is different. It was proved that the wear resistance of different woods depends on the abrasive particles size, too. Also the technical-economical evaluation was part of the carried out tests. It was univocally proved that at the intensive abrasive wear using the abrasive cloth the best results were shown by hard woods, e.g. apple, beech or mahogany. Soft woods, e.g. horse-chestnut, silver fir or sweet cherry, are cheap, but their wear is bigger compared to h

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20306 - Audio engineering, reliability analysis

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2017

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Research in Agricultural Engineering (Zemědělská technika)

ISSN

1212-9151

e-ISSN

1805-9376

Svazek periodika

63

Číslo periodika v rámci svazku

2

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

7

Strana od-do

91-97

Kód UT WoS článku

—

EID výsledku v databázi Scopus

2-s2.0-85026682123