Reduction of ploughshare wear by means of carbide overlay

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F18%3A76668" target="_blank" >RIV/60460709:41310/18:76668 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.21062/ujep/56.2018/a/1213-2489/MT/18/1/72" target="_blank" >http://dx.doi.org/10.21062/ujep/56.2018/a/1213-2489/MT/18/1/72</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.21062/ujep/56.2018/a/1213-2489/MT/18/1/72" target="_blank" >10.21062/ujep/56.2018/a/1213-2489/MT/18/1/72</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Reduction of ploughshare wear by means of carbide overlay

Popis výsledku v původním jazyce

An intensive abrasive wear of agricultural machines and their parts occurs at the soil processing. An undesirable change of a tool surface occurs owing to the wear. Namely ploughshares of a plough are intensively abrasive worn. This undesirable change leads to a function loss. The paper deals with an evaluation of the ploughshare service life. The aim of the research was to evaluate the wear of the ploughshare with a layer of a carbide hardfacing OK Tubrodur 15,82 deposited on a bottom side of the ploughshare. The research was performed within a laboratory testing (a hardness HV30 and a wear) and field tests. Laboratory experiment results proved that the overlay material showed a significant increase of the wear resistance and the hardness. These conclusions of the laboratory testing were certified at the field tests. The research results certified this procedure as an efficient solution at the decreasing of the ploughshare wear at the ploughing.

Název v anglickém jazyce

Reduction of ploughshare wear by means of carbide overlay

Popis výsledku anglicky

An intensive abrasive wear of agricultural machines and their parts occurs at the soil processing. An undesirable change of a tool surface occurs owing to the wear. Namely ploughshares of a plough are intensively abrasive worn. This undesirable change leads to a function loss. The paper deals with an evaluation of the ploughshare service life. The aim of the research was to evaluate the wear of the ploughshare with a layer of a carbide hardfacing OK Tubrodur 15,82 deposited on a bottom side of the ploughshare. The research was performed within a laboratory testing (a hardness HV30 and a wear) and field tests. Laboratory experiment results proved that the overlay material showed a significant increase of the wear resistance and the hardness. These conclusions of the laboratory testing were certified at the field tests. The research results certified this procedure as an efficient solution at the decreasing of the ploughshare wear at the ploughing.

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

40101 - Agriculture

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Manufacturing Technology

ISSN

1213-2489

e-ISSN

—

Svazek periodika

18

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

7

Strana od-do

72-78

Kód UT WoS článku

—

EID výsledku v databázi Scopus

2-s2.0-85049585245