Research on water jet cutting of polymer composites based on epoxy/waste fibres from coconut processing

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F19%3A79484" target="_blank" >RIV/60460709:41310/19:79484 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.1007/978-3-319-99353-9_6" target="_blank" >http://dx.doi.org/10.1007/978-3-319-99353-9_6</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1007/978-3-319-99353-9_6" target="_blank" >10.1007/978-3-319-99353-9_6</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Research on water jet cutting of polymer composites based on epoxy/waste fibres from coconut processing

Popis výsledku v původním jazyce

This paper deals with a machining of polymer fibre composite materials reinforced with a waste from coconut processing by means of an unconventional technology, i.e. an abrasive water jet (AWJ) and a water jet (WJ). Short and long fibres from the waste/a by-product from the coconut processing were used as the reinforcement within the research. The composite material was made by a vacuum infusion method. These composite materials are difficult to cut by another cutting method. They are used as a design upper/view element which is applied on a basic material, e.g. chipboards. These materials have to be cut precisely according to requirements of a shape and dimensions of a final product, e.g. for furniture industry. The paper deals with a study of an influence of the abrasive water jet and the water jet at their impact on a surface of the machined polymer fibre composite material. SEM analysis proved that a considerable destruction of the material occurred at the water jet outlet, i.e. on a bottom side

Název v anglickém jazyce

Research on water jet cutting of polymer composites based on epoxy/waste fibres from coconut processing

Popis výsledku anglicky

This paper deals with a machining of polymer fibre composite materials reinforced with a waste from coconut processing by means of an unconventional technology, i.e. an abrasive water jet (AWJ) and a water jet (WJ). Short and long fibres from the waste/a by-product from the coconut processing were used as the reinforcement within the research. The composite material was made by a vacuum infusion method. These composite materials are difficult to cut by another cutting method. They are used as a design upper/view element which is applied on a basic material, e.g. chipboards. These materials have to be cut precisely according to requirements of a shape and dimensions of a final product, e.g. for furniture industry. The paper deals with a study of an influence of the abrasive water jet and the water jet at their impact on a surface of the machined polymer fibre composite material. SEM analysis proved that a considerable destruction of the material occurred at the water jet outlet, i.e. on a bottom side

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20505 - Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics; filled composites)

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Lecture Notes in Electrical Engineering, International Conference on Manufacturing Engineering and Materials (ICMEM)

ISBN

—

ISSN

2195-4356

e-ISSN

—

Počet stran výsledku

9

Strana od-do

45-53

Název nakladatele

SPRINGER-VERLAG BERLIN, HEIDELBERGER PLATZ 3, D-14197 BERLIN, GERMANY

Místo vydání

neuvedeno

Místo konání akce

Novy Smokovec, SLOVAKIA

Datum konání akce

18. 6. 2018

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

000462541600006