Effects of selected factors on bending characteristics of beech wood

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F16%3A68605" target="_blank" >RIV/60460709:41320/16:68605 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.15376/biores.11.1.599-611" target="_blank" >http://dx.doi.org/10.15376/biores.11.1.599-611</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.15376/biores.11.1.599-611" target="_blank" >10.15376/biores.11.1.599-611</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Effects of selected factors on bending characteristics of beech wood

Popis výsledku v původním jazyce

Wood is a natural raw material that is an integral part of many production processes. By changing the input characteristics of native wood, the qualitative characteristics of the final product can be affected extensively. This article is concerned with examining several factors effects (thickness of the material, number of loading cycles) on the bending strength of beech wood during bending in the radial direction. A three-point bending test was used on the sample. The examined properties were investigated on samples of varying thicknesses that were not cyclically loaded, and the results were compared to those acquired from samples that were cyclically loaded. Thirty percent densification of the samples was achieved by rolling. Material fatigue was not achieved as an effect of examined number of cycles, nor did the examined characteristics change as an effect of cyclic loading. Densification of the wood by rolling had no effect on the changes in the examined mechanical properties at the determined le

Název v anglickém jazyce

Effects of selected factors on bending characteristics of beech wood

Popis výsledku anglicky

Wood is a natural raw material that is an integral part of many production processes. By changing the input characteristics of native wood, the qualitative characteristics of the final product can be affected extensively. This article is concerned with examining several factors effects (thickness of the material, number of loading cycles) on the bending strength of beech wood during bending in the radial direction. A three-point bending test was used on the sample. The examined properties were investigated on samples of varying thicknesses that were not cyclically loaded, and the results were compared to those acquired from samples that were cyclically loaded. Thirty percent densification of the samples was achieved by rolling. Material fatigue was not achieved as an effect of examined number of cycles, nor did the examined characteristics change as an effect of cyclic loading. Densification of the wood by rolling had no effect on the changes in the examined mechanical properties at the determined le

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JJ - Ostatní materiály

OECD FORD obor

—

Projekt

<a href="/cs/project/QJ1330233" target="_blank" >QJ1330233: Příprava legislativních, hospodářsko-úpravnických, mysliveckých a pěstitelsko-ochranářských rámců jako nástrojů adaptace lesního hospodářství na změny přírodních a společenských podmínek</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

BioResources

ISSN

1930-2126

e-ISSN

—

Svazek periodika

11

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

13

Strana od-do

599-611

Kód UT WoS článku

000367732700049

EID výsledku v databázi Scopus

—