Cutting power during cross-cutting of selected wood species with a circular saw

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F16%3A72281" target="_blank" >RIV/60460709:41320/16:72281 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.15376/biores.11.4.10528-10539" target="_blank" >http://dx.doi.org/10.15376/biores.11.4.10528-10539</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.15376/biores.11.4.10528-10539" target="_blank" >10.15376/biores.11.4.10528-10539</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Cutting power during cross-cutting of selected wood species with a circular saw

Popis výsledku v původním jazyce

This study assessed the effect of selected factors, such as the feed force, wood species (beech (Fagus sylvatica L.), English oak (Quercus robur L.), and spruce (Picea abies L.)), and the number of saw blade teeth on cutting power in the cross-cutting of lumber. The cutting was done using a circular saw with a rotating motion of the saw blade at a constant cutting speed (vc) of 62 m.s-1. The tangentially bucked lumber had a relative humidity (wr) of 12% +- 1% and a thickness (e) of 50 mm. For the experiment, four circular saw blades with SK plates, a uniform diameter, and identical angular geometry were used. The saw blades had a different number of teeth, and one saw blade had 24 teeth and a chip limiter. The aim of this study was to expand the knowledge about the resulting cutting performance with different combinations of technological process parameters.

Název v anglickém jazyce

Cutting power during cross-cutting of selected wood species with a circular saw

Popis výsledku anglicky

This study assessed the effect of selected factors, such as the feed force, wood species (beech (Fagus sylvatica L.), English oak (Quercus robur L.), and spruce (Picea abies L.)), and the number of saw blade teeth on cutting power in the cross-cutting of lumber. The cutting was done using a circular saw with a rotating motion of the saw blade at a constant cutting speed (vc) of 62 m.s-1. The tangentially bucked lumber had a relative humidity (wr) of 12% +- 1% and a thickness (e) of 50 mm. For the experiment, four circular saw blades with SK plates, a uniform diameter, and identical angular geometry were used. The saw blades had a different number of teeth, and one saw blade had 24 teeth and a chip limiter. The aim of this study was to expand the knowledge about the resulting cutting performance with different combinations of technological process parameters.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JJ - Ostatní materiály

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

BioResources

ISSN

1930-2126

e-ISSN

—

Svazek periodika

11

Číslo periodika v rámci svazku

4

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

12

Strana od-do

10528-10539

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—