Free-standing bacterial cellulose/polypyrrole composites for eco-friendly remediation of hexavalent chromium ions

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61389013%3A_____%2F24%3A00586904" target="_blank" >RIV/61389013:_____/24:00586904 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/00216305:26310/24:PU151346

Výsledek na webu

<a href="https://pubs.acs.org/doi/10.1021/acsapm.4c00579" target="_blank" >https://pubs.acs.org/doi/10.1021/acsapm.4c00579</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1021/acsapm.4c00579" target="_blank" >10.1021/acsapm.4c00579</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Free-standing bacterial cellulose/polypyrrole composites for eco-friendly remediation of hexavalent chromium ions

Popis výsledku v původním jazyce

Drinking water quality requirements are getting stricter but water sources are limited. Therefore, effective ways to purify it must be developed. In order to remove toxic Cr(VI) from wastewater, efficient, nontoxic, sustainable, resilient biocomposites based on bacterial cellulose (BC) and polypyrrole (PPy) have been fabricated. The free-standing BC/PPy composites, allowing easy handling during and after water treatment, were successfully prepared by the oxidative polymerization of pyrrole on the BC surface. The variation in the physical state of BC sheets used for coating by PPy was done to study the rheological properties and Cr(VI) removal capacity. Characterization techniques like FTIR, SEM, BET, thermogravimetric analysis, and rheological analyses established the morphology and structural properties of the prepared biocomposites. The physical state of the bacterial cellulose used for the coating by PPy positively affected the mechanical and thermal stabilities of the resulting BC/PPy composites but had almost no effect on the removal capacity of hexavalent chromium. The free-standing BC/PPy composites reached a specific surface area of 61.96 m2 g–1 and a pore volume of 0.097 cm3 g–1, showing more than a threefold increase compared to neat BC sheets. The coating of BC by PPy markedly improved the maximum adsorption capacity of Cr(VI). The experimental Cr(VI) adsorption data fitted using Langmuir’s isotherm model indicated homogeneous monolayer adsorption of Cr(VI) ions onto the BC/PPy surface. The Cr(VI) maximum adsorption capacity of BC/PPy composites was determined to be 294.1 mg g–1. Furthermore, the BC/PPy composites were proved to be excellent catalysts for the photocatalytic reduction of toxic Cr(VI) into nontoxic Cr(III) ions. These results suggest that the free-standing BC/PPy composites could be used as alternative materials for eco-friendly remediation of hexavalent chromium ions from wastewater.

Název v anglickém jazyce

Free-standing bacterial cellulose/polypyrrole composites for eco-friendly remediation of hexavalent chromium ions

Popis výsledku anglicky

Drinking water quality requirements are getting stricter but water sources are limited. Therefore, effective ways to purify it must be developed. In order to remove toxic Cr(VI) from wastewater, efficient, nontoxic, sustainable, resilient biocomposites based on bacterial cellulose (BC) and polypyrrole (PPy) have been fabricated. The free-standing BC/PPy composites, allowing easy handling during and after water treatment, were successfully prepared by the oxidative polymerization of pyrrole on the BC surface. The variation in the physical state of BC sheets used for coating by PPy was done to study the rheological properties and Cr(VI) removal capacity. Characterization techniques like FTIR, SEM, BET, thermogravimetric analysis, and rheological analyses established the morphology and structural properties of the prepared biocomposites. The physical state of the bacterial cellulose used for the coating by PPy positively affected the mechanical and thermal stabilities of the resulting BC/PPy composites but had almost no effect on the removal capacity of hexavalent chromium. The free-standing BC/PPy composites reached a specific surface area of 61.96 m2 g–1 and a pore volume of 0.097 cm3 g–1, showing more than a threefold increase compared to neat BC sheets. The coating of BC by PPy markedly improved the maximum adsorption capacity of Cr(VI). The experimental Cr(VI) adsorption data fitted using Langmuir’s isotherm model indicated homogeneous monolayer adsorption of Cr(VI) ions onto the BC/PPy surface. The Cr(VI) maximum adsorption capacity of BC/PPy composites was determined to be 294.1 mg g–1. Furthermore, the BC/PPy composites were proved to be excellent catalysts for the photocatalytic reduction of toxic Cr(VI) into nontoxic Cr(III) ions. These results suggest that the free-standing BC/PPy composites could be used as alternative materials for eco-friendly remediation of hexavalent chromium ions from wastewater.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

10404 - Polymer science

Projekt

<a href="/cs/project/GA21-01401S" target="_blank" >GA21-01401S: Inovativní kompozity na bázi vodivých polymerů pro čištění vody</a><br>

Návaznosti

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2024

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

ACS Applied Polymer Materials

ISSN

2637-6105

e-ISSN

2637-6105

Svazek periodika

6

Číslo periodika v rámci svazku

11

Stát vydavatele periodika

US - Spojené státy americké

Počet stran výsledku

10

Strana od-do

6383-6392

Kód UT WoS článku

001226107000001

EID výsledku v databázi Scopus

2-s2.0-85193463644