Application of Selected Fatigue Criteria on the Results of Multi-axial High-Cycle Fatigue Experiments

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27230%2F11%3A86079609" target="_blank" >RIV/61989100:27230/11:86079609 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Application of Selected Fatigue Criteria on the Results of Multi-axial High-Cycle Fatigue Experiments

Popis výsledku v původním jazyce

The paper describes experimental results obtained from combined loading consisting from torque and of the fully reversed push-pull (with phase shift equal do 0 and 90 degrees respectively) of the specimens in the field of high-cycle fatigue. Those specimens were manufactured from common construction steel 11523.1, melt T31052. The following experiments were performed: The first set of the specimens was loaded by the alternating torque amplitude. The second set was loaded by the in fully reversed push-pull. The third set of specimens was loaded by the combination of the torque and of the fully reversed push-pull. For this experiment the phase shift is zero. Fourth set of specimens was loaded by the combination of the torque and of the fully reversed push-pull with phase shift equal to 90 degrees. The results were evaluated by the modified conjugated strength criterion and another generally used multiaxial fatigue criteria. The stress-strain analysis of the specimens by FEM was performed

Název v anglickém jazyce

Application of Selected Fatigue Criteria on the Results of Multi-axial High-Cycle Fatigue Experiments

Popis výsledku anglicky

The paper describes experimental results obtained from combined loading consisting from torque and of the fully reversed push-pull (with phase shift equal do 0 and 90 degrees respectively) of the specimens in the field of high-cycle fatigue. Those specimens were manufactured from common construction steel 11523.1, melt T31052. The following experiments were performed: The first set of the specimens was loaded by the alternating torque amplitude. The second set was loaded by the in fully reversed push-pull. The third set of specimens was loaded by the combination of the torque and of the fully reversed push-pull. For this experiment the phase shift is zero. Fourth set of specimens was loaded by the combination of the torque and of the fully reversed push-pull with phase shift equal to 90 degrees. The results were evaluated by the modified conjugated strength criterion and another generally used multiaxial fatigue criteria. The stress-strain analysis of the specimens by FEM was performed

Druh

D - Stať ve sborníku

CEP obor

JL - Únava materiálu a lomová mechanika

OECD FORD obor

—

Projekt

<a href="/cs/project/GP101%2F08%2FP141" target="_blank" >GP101/08/P141: Výzkum mezních stavů proporcionálně zatěžovaných materiálů s využitím konjugovaného kritéria pevnosti</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2011

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

MMaMS 2011 : the 4th International conference on Modelling of Mechanical and Mechatronic Systems : proceeding

ISBN

978-80-553-0731-2

ISSN

—

e-ISSN

—

Počet stran výsledku

8

Strana od-do

104-111

Název nakladatele

Technická univerzita Košice

Místo vydání

Košice

Místo konání akce

Herľany

Datum konání akce

20. 9. 2011

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—