Influence of Cutting Tool Wear when Milling Inconel 718 on Resulting Roughness

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27230%2F18%3A10239058" target="_blank" >RIV/61989100:27230/18:10239058 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.scopus.com" target="_blank" >https://www.scopus.com</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.21062/ujep/121.2018/a/1213-2489/MT/18/3/457" target="_blank" >10.21062/ujep/121.2018/a/1213-2489/MT/18/3/457</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Influence of Cutting Tool Wear when Milling Inconel 718 on Resulting Roughness

Popis výsledku v původním jazyce

At present, a large spectrum of cutting tools and machines is available. Therefore, cutting of difficult to cut materials seems not to be a problem which could not be solved by an appropriate choice of cutting system. This article deals with wear of cutting tool edges when milling a superalloy Inconel 718 and its direct influence on resulting roughness of a machined surface. Combination of different cutting speeds and feeds have been performed. A criterion of flank wear amounting to VB=0,7 mm was chosen for machined material Inconel 718 and used cutting materials in combination with cutting condition. Regarding the exacting character of the test it was necessary to use an as solid as possible machine, that is why a 3-axis CNC milling machine was chosen. All tests were performed with proces liquid because of extremely high temperatures which occur.

Název v anglickém jazyce

Influence of Cutting Tool Wear when Milling Inconel 718 on Resulting Roughness

Popis výsledku anglicky

At present, a large spectrum of cutting tools and machines is available. Therefore, cutting of difficult to cut materials seems not to be a problem which could not be solved by an appropriate choice of cutting system. This article deals with wear of cutting tool edges when milling a superalloy Inconel 718 and its direct influence on resulting roughness of a machined surface. Combination of different cutting speeds and feeds have been performed. A criterion of flank wear amounting to VB=0,7 mm was chosen for machined material Inconel 718 and used cutting materials in combination with cutting condition. Regarding the exacting character of the test it was necessary to use an as solid as possible machine, that is why a 3-axis CNC milling machine was chosen. All tests were performed with proces liquid because of extremely high temperatures which occur.

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Manufacturing Technology

ISSN

1213-2489

e-ISSN

—

Svazek periodika

18

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

5

Strana od-do

547-461

Kód UT WoS článku

—

EID výsledku v databázi Scopus

2-s2.0-85053690557