The evaluation of the production of the shaped part using the workshop programming method on the two-spindle multi-axis CTX alpha 500 lathe
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27230%2F19%3A10243240" target="_blank" >RIV/61989100:27230/19:10243240 - isvavai.cz</a>
Výsledek na webu
<a href="https://www.degruyter.com/view/j/eng.2019.9.issue-1/eng-2019-0075/eng-2019-0075.xml" target="_blank" >https://www.degruyter.com/view/j/eng.2019.9.issue-1/eng-2019-0075/eng-2019-0075.xml</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.1515/eng-2019-0075" target="_blank" >10.1515/eng-2019-0075</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
The evaluation of the production of the shaped part using the workshop programming method on the two-spindle multi-axis CTX alpha 500 lathe
Popis výsledku v původním jazyce
The article deals with the description of the pro-duction of a shaped part composed of an outer pyramidand cylindrical surface, of inner cylindrical surfaces ofdifferent diameters and of an inner tongue groove. It de-scribes the proposed tools and tool holders resulting fromthe technological process. In order to meet the requiredtolerances and shape deviations for the given component,the CTX alpha 500 two-spindle multi-axis CNC lathe waschosen for its production. Its control system enables theworkshop method of programming and simulation of indi-vidual operations in automatic mode or in block-by-blockmode. The design of the selected CNC lathe enables the ma-chining of rotary parts in one clamping, which is ensuredby the right and left spindle with chucks. The surface qual-ity of the pyramidal surface and the internal diameter ofD18H8 was measured using a Hommel Etamic W5 rough-ness gauge. The measured roughness values for the holewere: D = 18H8, Rz = 3.007μm, Ra = 0.729μm and for thepyramidal surface: Rz = 1.527μm and Ra = 0.329μm
Název v anglickém jazyce
The evaluation of the production of the shaped part using the workshop programming method on the two-spindle multi-axis CTX alpha 500 lathe
Popis výsledku anglicky
The article deals with the description of the pro-duction of a shaped part composed of an outer pyramidand cylindrical surface, of inner cylindrical surfaces ofdifferent diameters and of an inner tongue groove. It de-scribes the proposed tools and tool holders resulting fromthe technological process. In order to meet the requiredtolerances and shape deviations for the given component,the CTX alpha 500 two-spindle multi-axis CNC lathe waschosen for its production. Its control system enables theworkshop method of programming and simulation of indi-vidual operations in automatic mode or in block-by-blockmode. The design of the selected CNC lathe enables the ma-chining of rotary parts in one clamping, which is ensuredby the right and left spindle with chucks. The surface qual-ity of the pyramidal surface and the internal diameter ofD18H8 was measured using a Hommel Etamic W5 rough-ness gauge. The measured roughness values for the holewere: D = 18H8, Rz = 3.007μm, Ra = 0.729μm and for thepyramidal surface: Rz = 1.527μm and Ra = 0.329μm
Klasifikace
Druh
J<sub>imp</sub> - Článek v periodiku v databázi Web of Science
CEP obor
—
OECD FORD obor
20301 - Mechanical engineering
Návaznosti výsledku
Projekt
—
Návaznosti
S - Specificky vyzkum na vysokych skolach
Ostatní
Rok uplatnění
2019
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Open Engineering
ISSN
2391-5439
e-ISSN
—
Svazek periodika
2020
Číslo periodika v rámci svazku
1
Stát vydavatele periodika
PL - Polská republika
Počet stran výsledku
8
Strana od-do
660-667
Kód UT WoS článku
000505161600002
EID výsledku v databázi Scopus
2-s2.0-85078175386