Estimating the Uncertainty of Measurements for Various Methods and 3D Printed Parts
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27230%2F24%3A10254959" target="_blank" >RIV/61989100:27230/24:10254959 - isvavai.cz</a>
Výsledek na webu
<a href="https://www.mdpi.com/2076-3417/14/8/3506" target="_blank" >https://www.mdpi.com/2076-3417/14/8/3506</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.3390/app14083506" target="_blank" >10.3390/app14083506</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Estimating the Uncertainty of Measurements for Various Methods and 3D Printed Parts
Popis výsledku v původním jazyce
This paper presents the results of a study on the dimensional accuracy analysis of models produced by 3D printing technology-Fused Filament Fabrication (FFF). Geometric measurements were conducted using a dial caliper, a 3D scanner and a coordinate measuring machine. In addition, a statistical analysis of the test results was carried out, considering the division into different numbers of test samples (3, 5, 10, 20, 30). The analysis of the test results made it possible to assess the influence of the measuring tools used and the number of samples tested on the final measurement result, as well as to determine the consequences associated with it.
Název v anglickém jazyce
Estimating the Uncertainty of Measurements for Various Methods and 3D Printed Parts
Popis výsledku anglicky
This paper presents the results of a study on the dimensional accuracy analysis of models produced by 3D printing technology-Fused Filament Fabrication (FFF). Geometric measurements were conducted using a dial caliper, a 3D scanner and a coordinate measuring machine. In addition, a statistical analysis of the test results was carried out, considering the division into different numbers of test samples (3, 5, 10, 20, 30). The analysis of the test results made it possible to assess the influence of the measuring tools used and the number of samples tested on the final measurement result, as well as to determine the consequences associated with it.
Klasifikace
Druh
J<sub>imp</sub> - Článek v periodiku v databázi Web of Science
CEP obor
—
OECD FORD obor
20300 - Mechanical engineering
Návaznosti výsledku
Projekt
—
Návaznosti
S - Specificky vyzkum na vysokych skolach
Ostatní
Rok uplatnění
2024
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Applied Sciences
ISSN
2076-3417
e-ISSN
2076-3417
Svazek periodika
14
Číslo periodika v rámci svazku
8
Stát vydavatele periodika
CH - Švýcarská konfederace
Počet stran výsledku
15
Strana od-do
—
Kód UT WoS článku
001210115600001
EID výsledku v databázi Scopus
—