Modelování a simulace teplotního pole elektronických senzorů

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27240%2F07%3A00017833" target="_blank" >RIV/61989100:27240/07:00017833 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Modeling and simulation of electronic sensors temperature field

Popis výsledku v původním jazyce

This paper deals with mathematical modeling of thermal load of sensors with distributed parameters. Practicularly it deals with thermal effects on a sensor, studying modified sensor of oil level. It is used a car, located in lower part of motor pan. Thermal field of a sensor is explored in this text, for concrete temperatures of oil and ambient. Upper part of the sensor is surrounded by the oil in the pan while the lower part is affected by ambient temperature of the surroundings. Sensor includes innerelectronic circuits that serve for sensor control. With high temperature the electronics of the sensor could be destroyed. Concerning the mathematical description of the problem, an analytical approach could be used in this case. However, it results in solving a set of complex differential equations quite difficult to handle and compute. Instead of this, numerical methods are chosen to reach a solution. In particular, the finite element method (FEM) was used in this project by means of t

Název v anglickém jazyce

Modeling and simulation of electronic sensors temperature field

Popis výsledku anglicky

This paper deals with mathematical modeling of thermal load of sensors with distributed parameters. Practicularly it deals with thermal effects on a sensor, studying modified sensor of oil level. It is used a car, located in lower part of motor pan. Thermal field of a sensor is explored in this text, for concrete temperatures of oil and ambient. Upper part of the sensor is surrounded by the oil in the pan while the lower part is affected by ambient temperature of the surroundings. Sensor includes innerelectronic circuits that serve for sensor control. With high temperature the electronics of the sensor could be destroyed. Concerning the mathematical description of the problem, an analytical approach could be used in this case. However, it results in solving a set of complex differential equations quite difficult to handle and compute. Instead of this, numerical methods are chosen to reach a solution. In particular, the finite element method (FEM) was used in this project by means of t

Druh

D - Stať ve sborníku

CEP obor

JB - Senzory, čidla, měření a regulace

OECD FORD obor

—

Projekt

<a href="/cs/project/GA102%2F06%2F0498" target="_blank" >GA102/06/0498: Modelování teplotní zátěže elektroniky moderních snímačů</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2007

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Proceedings of the 16th International Conference on Systems Science

ISBN

978-83-7493-341-4

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

61-66

Název nakladatele

Oficyna Wydawnicza Politechniki Wroclawskiej

Místo vydání

Wroclaw

Místo konání akce

—

Datum konání akce

—

Typ akce podle státní příslušnosti

—

Kód UT WoS článku

—