Pulse transmit time laboratory measurement solution

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27240%2F13%3A86100511" target="_blank" >RIV/61989100:27240/13:86100511 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.3182/20130925-3-CZ-3023.00004" target="_blank" >http://dx.doi.org/10.3182/20130925-3-CZ-3023.00004</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.3182/20130925-3-CZ-3023.00004" target="_blank" >10.3182/20130925-3-CZ-3023.00004</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Pulse transmit time laboratory measurement solution

Popis výsledku v původním jazyce

It is very important to monitor the patient's reaction to applied treatment at medical procedures. Blood pressure value is one of the important indicators of the patient's health. Blood pressure can be measured continuously, most often by using invasive methods or at defined time intervals during the standard medical examination. For diagnostic purposes, it would be advantage to measure the blood pressure in the long time intervals during the day or medical examination without using invasive methods. This article describes a laboratory experiment exploring the possibility to evaluate the blood pressure by non-invasively measured biosignals ECG and PPG. The value of the blood pressure is evaluated by delay of the pulse wave. This delay is called the pulse transit time-PTT. The article describes the methodology of measurement together with a description of each parts of the measuring chain. Measuring chain is consisting of hardware for the signal measuring and the software created in LabView for signal processing. A case study is used for the acquired data and the data are processed by means of regression analysis. (C) IFAC

Název v anglickém jazyce

Pulse transmit time laboratory measurement solution

Popis výsledku anglicky

It is very important to monitor the patient's reaction to applied treatment at medical procedures. Blood pressure value is one of the important indicators of the patient's health. Blood pressure can be measured continuously, most often by using invasive methods or at defined time intervals during the standard medical examination. For diagnostic purposes, it would be advantage to measure the blood pressure in the long time intervals during the day or medical examination without using invasive methods. This article describes a laboratory experiment exploring the possibility to evaluate the blood pressure by non-invasively measured biosignals ECG and PPG. The value of the blood pressure is evaluated by delay of the pulse wave. This delay is called the pulse transit time-PTT. The article describes the methodology of measurement together with a description of each parts of the measuring chain. Measuring chain is consisting of hardware for the signal measuring and the software created in LabView for signal processing. A case study is used for the acquired data and the data are processed by means of regression analysis. (C) IFAC

Druh

D - Stať ve sborníku

CEP obor

JB - Senzory, čidla, měření a regulace

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2013

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

IFAC Proceedings Volumes (IFAC-PapersOnline). Volume 12, Issue PART 1

ISBN

978-3-902823-53-3

ISSN

1474-6670

e-ISSN

—

Počet stran výsledku

4

Strana od-do

24-27

Název nakladatele

IFAC

Místo vydání

London

Místo konání akce

Velké Karlovice

Datum konání akce

25. 9. 2013

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—