Transformační teploty Slitin ni-ti měřené metodami rezistometrickou a termodilatometrickou

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27360%2F06%3A00014321" target="_blank" >RIV/61989100:27360/06:00014321 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Transformation temperatures of Ni-Ti based alloys measured by resistometric and thermo-dilatometric methods

Popis výsledku v původním jazyce

Intermetallic compound containing of approx. 50 at. % Ni and 50 at. % Ti is considered to be a standard shape memory alloy. Ni-Ti based alloys are highly stable and resistant to corrosion. Production of these alloys is very difficult due to high reactivity of titanium. The basic requirement to metallurgy of these advanced materials is strict adherence to chemical composition of the alloy, which is the main condition for obtaining of the alloy with the required transformation temperatures. Alloys on thebase of are usually melted at the temperature of approx. 1500 °C. For obtaining of wire it is the best to use technology of swagging in combination with subsequent drawing. Alloys with shape memory effect have generally several variants of shape memory behaviour. Generally speaking these are pseudo-elasticity, shape memory phenomenon (irreversible), reversible shape memory phenomenon and all-round shape memory effect. It is possible to measure transformation temperatures by deformation m

Název v anglickém jazyce

Transformation temperatures of Ni-Ti based alloys measured by resistometric and thermo-dilatometric methods

Popis výsledku anglicky

Intermetallic compound containing of approx. 50 at. % Ni and 50 at. % Ti is considered to be a standard shape memory alloy. Ni-Ti based alloys are highly stable and resistant to corrosion. Production of these alloys is very difficult due to high reactivity of titanium. The basic requirement to metallurgy of these advanced materials is strict adherence to chemical composition of the alloy, which is the main condition for obtaining of the alloy with the required transformation temperatures. Alloys on thebase of are usually melted at the temperature of approx. 1500 °C. For obtaining of wire it is the best to use technology of swagging in combination with subsequent drawing. Alloys with shape memory effect have generally several variants of shape memory behaviour. Generally speaking these are pseudo-elasticity, shape memory phenomenon (irreversible), reversible shape memory phenomenon and all-round shape memory effect. It is possible to measure transformation temperatures by deformation m

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JG - Hutnictví, kovové materiály

OECD FORD obor

—

Projekt

—

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2006

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Acta Metallurgica Slovaca

ISSN

1335-1532

e-ISSN

—

Svazek periodika

12

Číslo periodika v rámci svazku

4

Stát vydavatele periodika

SK - Slovenská republika

Počet stran výsledku

9

Strana od-do

411-419

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—