Stress-strain behaviour and softening in manganese TWIP steel tested in thermal-mechanical simulator

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27360%2F09%3A00022026" target="_blank" >RIV/61989100:27360/09:00022026 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Stress-strain behaviour and softening in manganese TWIP steel tested in thermal-mechanical simulator

Popis výsledku v původním jazyce

The ferromanganese TWIP steels with content of 17 to 20 % of manganese are fully austenitic and non-magnetic, without any phase transformation. Owing to the claiming of the twinning mechanism the TWIP-steels are able to satisfy a great number of technical requirements for production of cars of the new generation. The primary experimental results of the TWIP-steels show the high end tensile strength of 600 to 1100 MPa und extreme values of ductility at intervals from 60 % to 90 %. Through the method of plasma and vacuum melting there were prepared alloyed castings Fe-Mn-C. The samples with dimension of 8,5 x 15 x 20 mm were put to plasto-metrically checking (PSCT) on the Gleeble 3500. As variables there were selected temperatures from 900 ?C to 1100 ?C.The tests were both continuous with the deformation e = 0,8 as discontinuous with the consecutive deformations e1 up to e3 = 0,3 and with the terms between the draughts from 1 second to 100 seconds.

Název v anglickém jazyce

Stress-strain behaviour and softening in manganese TWIP steel tested in thermal-mechanical simulator

Popis výsledku anglicky

The ferromanganese TWIP steels with content of 17 to 20 % of manganese are fully austenitic and non-magnetic, without any phase transformation. Owing to the claiming of the twinning mechanism the TWIP-steels are able to satisfy a great number of technical requirements for production of cars of the new generation. The primary experimental results of the TWIP-steels show the high end tensile strength of 600 to 1100 MPa und extreme values of ductility at intervals from 60 % to 90 %. Through the method of plasma and vacuum melting there were prepared alloyed castings Fe-Mn-C. The samples with dimension of 8,5 x 15 x 20 mm were put to plasto-metrically checking (PSCT) on the Gleeble 3500. As variables there were selected temperatures from 900 ?C to 1100 ?C.The tests were both continuous with the deformation e = 0,8 as discontinuous with the consecutive deformations e1 up to e3 = 0,3 and with the terms between the draughts from 1 second to 100 seconds.

Druh

D - Stať ve sborníku

CEP obor

JG - Hutnictví, kovové materiály

OECD FORD obor

—

Projekt

<a href="/cs/project/GA106%2F07%2F0631" target="_blank" >GA106/07/0631: Plastometrická, počítačová a laboratorní simulace uzdravování materiálu tvářeného za tepla</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2009

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

18. International Conference on Metallurgy and Materials METAL 2009

ISBN

978-80-87294-10-9

ISSN

—

e-ISSN

—

Počet stran výsledku

8

Strana od-do

—

Název nakladatele

TANGER, spol. s r.o.

Místo vydání

Ostrava

Místo konání akce

Hradec nad Moravicí

Datum konání akce

19. 5. 2009

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

000269313300015