Finite element analysis of dovetail joint made with the use of CNC technology

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62156489%3A43410%2F10%3A00161694" target="_blank" >RIV/62156489:43410/10:00161694 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Finite element analysis of dovetail joint made with the use of CNC technology

Popis výsledku v původním jazyce

The objective of the paper is the parametrization and the finite element analysis of mechanical properties of a through dovetail joint made with the use of a specific procedure by a 3-axis CNC machine. This corner joint was used for the simulation of thebending load of the joint in the angle plane -- by compression, i.e. by pressing the joint together. The deformation fields, the stress distribution, the stiffness and the bending moment of the joints were evaluated. The finite element system ANSYS wasused to create two parametric numerical models of the joint. The first one represents an ideally stiff joint -- both joint parts have been glued together. The second model includes the contact between the joined parts. This numerical model was used to monitor the response of the joint stiffness to the change of the static friction coefficient. The results of both models were compared both with each other and with similar analyses conducted within the research into ready-to-assemble furni

Název v anglickém jazyce

Finite element analysis of dovetail joint made with the use of CNC technology

Popis výsledku anglicky

The objective of the paper is the parametrization and the finite element analysis of mechanical properties of a through dovetail joint made with the use of a specific procedure by a 3-axis CNC machine. This corner joint was used for the simulation of thebending load of the joint in the angle plane -- by compression, i.e. by pressing the joint together. The deformation fields, the stress distribution, the stiffness and the bending moment of the joints were evaluated. The finite element system ANSYS wasused to create two parametric numerical models of the joint. The first one represents an ideally stiff joint -- both joint parts have been glued together. The second model includes the contact between the joined parts. This numerical model was used to monitor the response of the joint stiffness to the change of the static friction coefficient. The results of both models were compared both with each other and with similar analyses conducted within the research into ready-to-assemble furni

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

GK - Lesnictví

OECD FORD obor

—

Projekt

—

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2010

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Acta Universitatis agriculturae et silviculturae Mendelianae Brunensis : Acta of Mendel University of agriculture and forestry Brno = Acta Mendelovy zemědělské a lesnické univerzity v Brně

ISSN

1211-8516

e-ISSN

—

Svazek periodika

58

Číslo periodika v rámci svazku

5

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

9

Strana od-do

—

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—