The Wear Process of Router Bit during the Machining Dovetail Joints

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62156489%3A43410%2F12%3A00193220" target="_blank" >RIV/62156489:43410/12:00193220 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/60162694:G43__/13:00498071

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

The Wear Process of Router Bit during the Machining Dovetail Joints

Popis výsledku v původním jazyce

The aim of the study was to explore the process of router bit tool wear during the processing of a through dovetail joint by means of a 3-axis CNC router. The dovetail joint was processed in birch plywood. The tools which were used for the examination oftool wear during the proposed production process were two two-fluted helical router bits made from sintered carbide. The parameters analysed were the radius of the wear of the cutting edges of tools in relation to the machined distance, material and also to the accuracy (surface quality) of the machined areas (joints). The cutting edge wear was measured by two methods: a contact method and a non-contact method. As a result, the study examines and describes the process of tool wear of the monitored tools for the mentioned method of processing. The study evaluates the measured parameters of processing in relation to the newly designed production procedure.

Název v anglickém jazyce

The Wear Process of Router Bit during the Machining Dovetail Joints

Popis výsledku anglicky

The aim of the study was to explore the process of router bit tool wear during the processing of a through dovetail joint by means of a 3-axis CNC router. The dovetail joint was processed in birch plywood. The tools which were used for the examination oftool wear during the proposed production process were two two-fluted helical router bits made from sintered carbide. The parameters analysed were the radius of the wear of the cutting edges of tools in relation to the machined distance, material and also to the accuracy (surface quality) of the machined areas (joints). The cutting edge wear was measured by two methods: a contact method and a non-contact method. As a result, the study examines and describes the process of tool wear of the monitored tools for the mentioned method of processing. The study evaluates the measured parameters of processing in relation to the newly designed production procedure.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JP - Průmyslové procesy a zpracování

OECD FORD obor

—

Projekt

—

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2013

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Wood Research

ISSN

1336-4561

e-ISSN

—

Svazek periodika

57

Číslo periodika v rámci svazku

4

Stát vydavatele periodika

SK - Slovenská republika

Počet stran výsledku

10

Strana od-do

659-668

Kód UT WoS článku

313147200015

EID výsledku v databázi Scopus

—