Microwave Device for Continuous Modification of Wood
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62156489%3A43410%2F14%3A00216418" target="_blank" >RIV/62156489:43410/14:00216418 - isvavai.cz</a>
Výsledek na webu
<a href="http://www.ncsu.edu/bioresources/BioRes_09/BioRes_09_2_3025_Kois_DT_Microwave_Device_Continuous_Mod_Wood_5342.pdf" target="_blank" >http://www.ncsu.edu/bioresources/BioRes_09/BioRes_09_2_3025_Kois_DT_Microwave_Device_Continuous_Mod_Wood_5342.pdf</a>
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Microwave Device for Continuous Modification of Wood
Popis výsledku v původním jazyce
The aims of this study were to introduce a new laboratory microwave device developed for the modification of wood properties and to examine the effect of microwave radiation on moisture loss, surface temperature, and mechanical properties (the static modulus of elasticity - MOE, and the modulus of rupture - MOR) of Norway spruce (Picea abies). The device was developed for a continuous modification process. The microwave (MW) generator works at a frequency of 2450 MHz, and the adjusted output ranges from0.6 to 6 kW. The experiment was based on four different modes of MW modification, each of them with a varied generator output and conveyor speed. Regarding mechanical properties, the results showed that a feasible output for the MW modification of the samples was up to 3 kW, with a conveyor speed of around 0.4 m/min. The greatest moisture loss, approximately 40%, was found in the group treated at 5 kW and 0.2 m/min. The highest surface temperature, 87 °C, was measured in the group treat
Název v anglickém jazyce
Microwave Device for Continuous Modification of Wood
Popis výsledku anglicky
The aims of this study were to introduce a new laboratory microwave device developed for the modification of wood properties and to examine the effect of microwave radiation on moisture loss, surface temperature, and mechanical properties (the static modulus of elasticity - MOE, and the modulus of rupture - MOR) of Norway spruce (Picea abies). The device was developed for a continuous modification process. The microwave (MW) generator works at a frequency of 2450 MHz, and the adjusted output ranges from0.6 to 6 kW. The experiment was based on four different modes of MW modification, each of them with a varied generator output and conveyor speed. Regarding mechanical properties, the results showed that a feasible output for the MW modification of the samples was up to 3 kW, with a conveyor speed of around 0.4 m/min. The greatest moisture loss, approximately 40%, was found in the group treated at 5 kW and 0.2 m/min. The highest surface temperature, 87 °C, was measured in the group treat
Klasifikace
Druh
J<sub>x</sub> - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
CEP obor
JJ - Ostatní materiály
OECD FORD obor
—
Návaznosti výsledku
Projekt
—
Návaznosti
S - Specificky vyzkum na vysokych skolach
Ostatní
Rok uplatnění
2014
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
BioResources
ISSN
1930-2126
e-ISSN
—
Svazek periodika
9
Číslo periodika v rámci svazku
2
Stát vydavatele periodika
US - Spojené státy americké
Počet stran výsledku
13
Strana od-do
3025-3037
Kód UT WoS článku
336960700097
EID výsledku v databázi Scopus
—