Elasto-plastic material model of oak at two moisture content levels

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62156489%3A43410%2F22%3A43921853" target="_blank" >RIV/62156489:43410/22:43921853 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.1515/hf-2022-0008" target="_blank" >https://doi.org/10.1515/hf-2022-0008</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1515/hf-2022-0008" target="_blank" >10.1515/hf-2022-0008</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Elasto-plastic material model of oak at two moisture content levels

Popis výsledku v původním jazyce

The mechanical properties of wood show a very high dependence on the moisture content (MC). A consideration of MC in numerical simulations increases the applicability of such prediction with respect to application and moisture states of the wood material. The goal of this work is to develop an accurate orthotropic elasto-plastic model for oak wood (Quercus robur L.) at two different MC levels applicable for finite element analysis (FEA). To achieve this goal, the following steps were carried out: (a) in-house standard specimens tests in compression, tension, and shear and in all three orthogonal directions, followed by three-point bending, where all specimens were conditioned to a 12 and 25.6% MC, prior to the mechanical test; (b) integration of all obtained material characteristics into the consistent numerical material models; (c) validation of the developed material models by comparing the numerically predicted values with the experimental ones; and (d) iterative calibration of the material models by adjusting the individual material characteristics to minimize error using a reference. Material models were successfully developed with the following mean relative errors: 5.2% for 12% MC and 5.8% for 25.6% MC, respectively. Both numerical material models consistently predicted the oak elasto-plastic response that can be easily integrated into any FEA.

Název v anglickém jazyce

Elasto-plastic material model of oak at two moisture content levels

Popis výsledku anglicky

The mechanical properties of wood show a very high dependence on the moisture content (MC). A consideration of MC in numerical simulations increases the applicability of such prediction with respect to application and moisture states of the wood material. The goal of this work is to develop an accurate orthotropic elasto-plastic model for oak wood (Quercus robur L.) at two different MC levels applicable for finite element analysis (FEA). To achieve this goal, the following steps were carried out: (a) in-house standard specimens tests in compression, tension, and shear and in all three orthogonal directions, followed by three-point bending, where all specimens were conditioned to a 12 and 25.6% MC, prior to the mechanical test; (b) integration of all obtained material characteristics into the consistent numerical material models; (c) validation of the developed material models by comparing the numerically predicted values with the experimental ones; and (d) iterative calibration of the material models by adjusting the individual material characteristics to minimize error using a reference. Material models were successfully developed with the following mean relative errors: 5.2% for 12% MC and 5.8% for 25.6% MC, respectively. Both numerical material models consistently predicted the oak elasto-plastic response that can be easily integrated into any FEA.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20502 - Paper and wood

Projekt

<a href="/cs/project/LL1909" target="_blank" >LL1909: Dynamika stromu: popis mechanické odezvy na zatížení</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2022

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Holzforschung

ISSN

0018-3830

e-ISSN

1437-434X

Svazek periodika

76

Číslo periodika v rámci svazku

10

Stát vydavatele periodika

DE - Spolková republika Německo

Počet stran výsledku

11

Strana od-do

886-896

Kód UT WoS článku

000835432500001

EID výsledku v databázi Scopus

2-s2.0-85135706593