The fracture behaviour and its predicion based on the local approach.

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68081723%3A_____%2F02%3A07023020" target="_blank" >RIV/68081723:_____/02:07023020 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

The fracture behaviour and its predicion based on the local approach.

Popis výsledku v původním jazyce

The master curve (MC) concept has been used for assessment of the fracture toughness transition behaviour of C-Mn cast steel intended for fabrication of large containers for spent nuclear fuel (ŠKODA). Standard fracture toughness tests using single edgenotched bend specimens (SENB) with various crack lengths, the static tests of the CVN specimens and the axisymmetric notched tensile specimens have been utilized. The transferability of results received on the small pre-cracked Charpy specimens are tested here and the methodology MC is applied. For determining the reference transition temperature, To, which is taken as a basic material characteristic positioning the MC on the temperature axis, the large (1T) specimens are required. Additionally, the small pre-cracked Charpy type specimens have been used for determining the fracture transition behaviour and for fracture toughness measurement and prediction.

Název v anglickém jazyce

The fracture behaviour and its predicion based on the local approach.

Popis výsledku anglicky

The master curve (MC) concept has been used for assessment of the fracture toughness transition behaviour of C-Mn cast steel intended for fabrication of large containers for spent nuclear fuel (ŠKODA). Standard fracture toughness tests using single edgenotched bend specimens (SENB) with various crack lengths, the static tests of the CVN specimens and the axisymmetric notched tensile specimens have been utilized. The transferability of results received on the small pre-cracked Charpy specimens are tested here and the methodology MC is applied. For determining the reference transition temperature, To, which is taken as a basic material characteristic positioning the MC on the temperature axis, the large (1T) specimens are required. Additionally, the small pre-cracked Charpy type specimens have been used for determining the fracture transition behaviour and for fracture toughness measurement and prediction.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JL - Únava materiálu a lomová mechanika

OECD FORD obor

—

Projekt

<a href="/cs/project/GA101%2F00%2F0170" target="_blank" >GA101/00/0170: Přenositelnost charakteristik lomové houževnatosti z hlediska hodnocení integrity komponent s defekty</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2002

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Nuclear Engineering and Design

ISSN

0029-5493

e-ISSN

—

Svazek periodika

N/A

Číslo periodika v rámci svazku

212

Stát vydavatele periodika

NL - Nizozemsko

Počet stran výsledku

7

Strana od-do

67-73

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—