Analýza lomového chování vícevrstvých trubek

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68081723%3A_____%2F07%3A00090871" target="_blank" >RIV/68081723:_____/07:00090871 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Analysis of Fracture Behaviour of Multilayer Pipes

Popis výsledku v původním jazyce

Two-layer pipes made of PE 100 and PPH were chosen for the present study. The PPH pipe provided a protective layer for the PE 100 pipe. The relevant numerical model based on the finite element method (FEM) was used to calculate the stress distribution inthe pipe and the corresponding fracture mechanics parameters were estimated. Two crack configurations (inside and outside cracks) were analysed numerically. The influence of the Young modulus of both components on possible crack propagation is discussed. From the experimental point of view, the compact tension (CT), single edge notch bending (SENB) and C shaped (C) specimens taken from the pipe were tested under a static load and at different temperatures. As a fracture parameter the J ? integral characteristic and its dependence on stable crack growth, the crack orientation and temperature were chosen. A correlation between the experimental and theoretical results was found.

Název v anglickém jazyce

Analysis of Fracture Behaviour of Multilayer Pipes

Popis výsledku anglicky

Two-layer pipes made of PE 100 and PPH were chosen for the present study. The PPH pipe provided a protective layer for the PE 100 pipe. The relevant numerical model based on the finite element method (FEM) was used to calculate the stress distribution inthe pipe and the corresponding fracture mechanics parameters were estimated. Two crack configurations (inside and outside cracks) were analysed numerically. The influence of the Young modulus of both components on possible crack propagation is discussed. From the experimental point of view, the compact tension (CT), single edge notch bending (SENB) and C shaped (C) specimens taken from the pipe were tested under a static load and at different temperatures. As a fracture parameter the J ? integral characteristic and its dependence on stable crack growth, the crack orientation and temperature were chosen. A correlation between the experimental and theoretical results was found.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JL - Únava materiálu a lomová mechanika

OECD FORD obor

—

Projekt

<a href="/cs/project/GA106%2F07%2F1284" target="_blank" >GA106/07/1284: Houževnatost polyolefinových kompozitů se submikroskopickými částicemi</a><br>

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2007

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Plastics Rubber and Composites

ISSN

1465-8011

e-ISSN

—

Svazek periodika

36

Číslo periodika v rámci svazku

5

Stát vydavatele periodika

GB - Spojené království Velké Británie a Severního Irska

Počet stran výsledku

6

Strana od-do

207-212

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—