Enhanced Ammonia Adsorption on Directly Deposited Nanofibrous Carbon Films

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68081723%3A_____%2F18%3A00494670" target="_blank" >RIV/68081723:_____/18:00494670 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/00216224:14740/18:00104270 RIV/00216305:26220/18:PU129383

Výsledek na webu

<a href="http://dx.doi.org/10.1155/2018/7497619" target="_blank" >http://dx.doi.org/10.1155/2018/7497619</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1155/2018/7497619" target="_blank" >10.1155/2018/7497619</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Enhanced Ammonia Adsorption on Directly Deposited Nanofibrous Carbon Films

Popis výsledku v původním jazyce

The ammonia adsorption on the nanostructured carbon thin film was significantly influenced by the choice of deposition temperature and deposition time of thin film synthesis. The thin films were prepared on Si/SiO2 substrates by chemical vapour deposition in Ar/C2H2 gas mixture using iron catalytic nanoparticles. The analysis of the grown layer by the scanning and transmission electron microscopy showed the transition from long multiwalled nanotubes (MWCNTs) to bamboo-like hollow carbon nanofiber structure with the decrease of the deposition temperature from 700 to 600 degrees C. Further, the material was analyzed by energy-dispersive X-ray spectroscopy and Raman spectroscopy confirmed the transition from graphitic sp(2) structure to highly defective structure at lower deposition temperature. The resistance of the prepared layer strongly depends on deposition temperature (T-d) and deposition time (t(d)). High resistance layer, 38.6 k Omega, was formed at T-d 600 degrees C and t(d) 10 min, while at T-d 700 degrees C and t(d) 60 min, the resistance decreased to 860 ohms. Such behaviour is consistent with MWCNTs being responsible for the formation of the conductive network. Such system was studied using chemiresistor ammonia gas sensor configuration. The sensor resistance increased when exposed to ammonia in all the cases, but their response varied considerably. A decrease in deposition time, from 60 to 10 min, and the deposition temperature, from 700 to 600 degrees C, led to the 10-fold increase in the sensor response. The measurements carried out at room temperature showed the higher sensor response than the measurements carried out at 200 degrees C. This behaviour can be explained by the change in adsorption-desorption equilibrium at different temperatures. Analysis of dependence of the sensor response on the ammonia concentration proved that the underlying resistance change mechanism is chemisorption of ammonia molecules on the carbon network corresponding to the Langmuir isotherm.

Název v anglickém jazyce

Enhanced Ammonia Adsorption on Directly Deposited Nanofibrous Carbon Films

Popis výsledku anglicky

The ammonia adsorption on the nanostructured carbon thin film was significantly influenced by the choice of deposition temperature and deposition time of thin film synthesis. The thin films were prepared on Si/SiO2 substrates by chemical vapour deposition in Ar/C2H2 gas mixture using iron catalytic nanoparticles. The analysis of the grown layer by the scanning and transmission electron microscopy showed the transition from long multiwalled nanotubes (MWCNTs) to bamboo-like hollow carbon nanofiber structure with the decrease of the deposition temperature from 700 to 600 degrees C. Further, the material was analyzed by energy-dispersive X-ray spectroscopy and Raman spectroscopy confirmed the transition from graphitic sp(2) structure to highly defective structure at lower deposition temperature. The resistance of the prepared layer strongly depends on deposition temperature (T-d) and deposition time (t(d)). High resistance layer, 38.6 k Omega, was formed at T-d 600 degrees C and t(d) 10 min, while at T-d 700 degrees C and t(d) 60 min, the resistance decreased to 860 ohms. Such behaviour is consistent with MWCNTs being responsible for the formation of the conductive network. Such system was studied using chemiresistor ammonia gas sensor configuration. The sensor resistance increased when exposed to ammonia in all the cases, but their response varied considerably. A decrease in deposition time, from 60 to 10 min, and the deposition temperature, from 700 to 600 degrees C, led to the 10-fold increase in the sensor response. The measurements carried out at room temperature showed the higher sensor response than the measurements carried out at 200 degrees C. This behaviour can be explained by the change in adsorption-desorption equilibrium at different temperatures. Analysis of dependence of the sensor response on the ammonia concentration proved that the underlying resistance change mechanism is chemisorption of ammonia molecules on the carbon network corresponding to the Langmuir isotherm.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

10302 - Condensed matter physics (including formerly solid state physics, supercond.)

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Journal of Sensors

ISSN

1687-725X

e-ISSN

—

Svazek periodika

2018

Číslo periodika v rámci svazku

SEP

Stát vydavatele periodika

GB - Spojené království Velké Británie a Severního Irska

Počet stran výsledku

14

Strana od-do

—

Kód UT WoS článku

000446070400001

EID výsledku v databázi Scopus

2-s2.0-85062635267