Modeling of elastoplastic behavior of freestanding squarenthin films under bulge testing

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68081723%3A_____%2F21%3A00542223" target="_blank" >RIV/68081723:_____/21:00542223 - isvavai.cz</a>

Výsledek na webu

<a href="https://link.springer.com/article/10.1007/s00707-021-02978-7" target="_blank" >https://link.springer.com/article/10.1007/s00707-021-02978-7</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1007/s00707-021-02978-7" target="_blank" >10.1007/s00707-021-02978-7</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Modeling of elastoplastic behavior of freestanding squarenthin films under bulge testing

Popis výsledku v původním jazyce

Bulge testing is an experimental technique applied to the characterization of thin films, with which the mechanical properties are obtained employing numerical and analytical approaches. For rectangular and circular thin films, classical methods have been well adopted to calculate the stresses and strains at the central point without the dependency of its properties. It is due to that the equilibrium conditions are dependent on the curvatures generated at the maximum deflection point. Therefore, the kinematics of the bulged surface can be represented by a spherical cap and cylindrical shapes in these films. For square thin films, the deflected surface presents a complex displacement field that implies the development of analytical models for the estimation of these. In this sense, equations to represent the equibiaxial stress state (central point) for freestanding square thin films are developed and applied in this study. The curvatures are determined using a reviewed nonlinear deflection field. Virtual experiments were driven by applying finite element analysis to validate the stress and strain models through parametric analysis.In order to impose the residual stress in thin films, two approaches of modeling for the simulations are described. In order to validate the applicability of the proposed equations, different cases were presented for the linear elastic analysis, and two examples were developed to characterize elastoplastic behavior (bilinear and nonlinear) from load–deflection curves. The obtained results show that the developed models for square thin films are in good agreement with the finite element simulations since these predicted the stress and strain states with good accuracy.

Název v anglickém jazyce

Modeling of elastoplastic behavior of freestanding squarenthin films under bulge testing

Popis výsledku anglicky

Bulge testing is an experimental technique applied to the characterization of thin films, with which the mechanical properties are obtained employing numerical and analytical approaches. For rectangular and circular thin films, classical methods have been well adopted to calculate the stresses and strains at the central point without the dependency of its properties. It is due to that the equilibrium conditions are dependent on the curvatures generated at the maximum deflection point. Therefore, the kinematics of the bulged surface can be represented by a spherical cap and cylindrical shapes in these films. For square thin films, the deflected surface presents a complex displacement field that implies the development of analytical models for the estimation of these. In this sense, equations to represent the equibiaxial stress state (central point) for freestanding square thin films are developed and applied in this study. The curvatures are determined using a reviewed nonlinear deflection field. Virtual experiments were driven by applying finite element analysis to validate the stress and strain models through parametric analysis.In order to impose the residual stress in thin films, two approaches of modeling for the simulations are described. In order to validate the applicability of the proposed equations, different cases were presented for the linear elastic analysis, and two examples were developed to characterize elastoplastic behavior (bilinear and nonlinear) from load–deflection curves. The obtained results show that the developed models for square thin films are in good agreement with the finite element simulations since these predicted the stress and strain states with good accuracy.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20302 - Applied mechanics

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2021

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Acta Mechanica

ISSN

0001-5970

e-ISSN

1619-6937

Svazek periodika

232

Číslo periodika v rámci svazku

7

Stát vydavatele periodika

AT - Rakouská republika

Počet stran výsledku

17

Strana od-do

2715-2731

Kód UT WoS článku

000645192400003

EID výsledku v databázi Scopus

2-s2.0-85105393098