Creep of cement paste preloaded by high temperature

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F10%3A00176520" target="_blank" >RIV/68407700:21110/10:00176520 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Creep of cement paste preloaded by high temperature

Popis výsledku v původním jazyce

Creep of cement paste is possible integrate into the basic properties, which is important not only for modeling, but for design of structures, too. In the paper are described experimental results of measuring of the cement pastes creep. For measuring wasused the cement CEM II and prepared pastes with water cement ratio from 0.3 to 0.5. All specimens were preloaded by temperature at 300 °C. Creep of pastes was measured on water saturated and water dried specimens. Shrinkage of different cement pastes was measured, too. Mechanical properties of pastes were measured after finishing of creep tests. Dimensions of cylindrical specimens were 10mm in diameter and 70 mm in length. Cylinders were tested in the special creep test equipment and in the electromechanical testing equipment for the uniaxial compression tests.

Název v anglickém jazyce

Creep of cement paste preloaded by high temperature

Popis výsledku anglicky

Creep of cement paste is possible integrate into the basic properties, which is important not only for modeling, but for design of structures, too. In the paper are described experimental results of measuring of the cement pastes creep. For measuring wasused the cement CEM II and prepared pastes with water cement ratio from 0.3 to 0.5. All specimens were preloaded by temperature at 300 °C. Creep of pastes was measured on water saturated and water dried specimens. Shrinkage of different cement pastes was measured, too. Mechanical properties of pastes were measured after finishing of creep tests. Dimensions of cylindrical specimens were 10mm in diameter and 70 mm in length. Cylinders were tested in the special creep test equipment and in the electromechanical testing equipment for the uniaxial compression tests.

Druh

D - Stať ve sborníku

CEP obor

JN - Stavebnictví

OECD FORD obor

—

Projekt

<a href="/cs/project/GA103%2F08%2F1492" target="_blank" >GA103/08/1492: Virtuální testy dotvarování betonu</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2010

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Advances in Control, Chemical Engineering, Civil Engineering & Mechanical Engineering

ISBN

978-960-474-251-6

ISSN

1792-6661

e-ISSN

—

Počet stran výsledku

6

Strana od-do

—

Název nakladatele

WSEAS Press

Místo vydání

New Jersey

Místo konání akce

Puerto De La Cruz

Datum konání akce

30. 11. 2010

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—