Impact of Temperature Setpoint and Thermal Control Material on Indoor Environment Quality and Energy Use in Office Buildings in Two Climatic Regions

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F12%3A00194066" target="_blank" >RIV/68407700:21110/12:00194066 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Impact of Temperature Setpoint and Thermal Control Material on Indoor Environment Quality and Energy Use in Office Buildings in Two Climatic Regions

Popis výsledku v původním jazyce

This paper presents the impact of temperature setpoint and thermal control material on energy use and indoor environmental quality in two different climates using the case study of an office room. The study is conducted in two stages. The first stage focussed on energy consumption for cooling, heating and ventilation of the office whilst maintaining thermal comfort determined from the Predicated Percentage Dissatisfied (PPD) and Predicted Mean Vote (PMV). The second part evaluates the influence of thermal control materials - Vacuum Insulated Panels (VIP) and Phase Change Materials (PCM gypsum plasters) on thermal comfort and energy saving. Comparison of indoor environment condition is performed using a computer simulation tool (ESP-r) and assessed according to the standards requirements in the selected regions. Computer simulation was verified by in situ measurements.

Název v anglickém jazyce

Impact of Temperature Setpoint and Thermal Control Material on Indoor Environment Quality and Energy Use in Office Buildings in Two Climatic Regions

Popis výsledku anglicky

This paper presents the impact of temperature setpoint and thermal control material on energy use and indoor environmental quality in two different climates using the case study of an office room. The study is conducted in two stages. The first stage focussed on energy consumption for cooling, heating and ventilation of the office whilst maintaining thermal comfort determined from the Predicated Percentage Dissatisfied (PPD) and Predicted Mean Vote (PMV). The second part evaluates the influence of thermal control materials - Vacuum Insulated Panels (VIP) and Phase Change Materials (PCM gypsum plasters) on thermal comfort and energy saving. Comparison of indoor environment condition is performed using a computer simulation tool (ESP-r) and assessed according to the standards requirements in the selected regions. Computer simulation was verified by in situ measurements.

Druh

D - Stať ve sborníku

CEP obor

JM - Inženýrské stavitelství

OECD FORD obor

—

Projekt

<a href="/cs/project/7E09046" target="_blank" >7E09046: Clean buildings along with resource efficiency enhancement using appropriate materials and technology</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2012

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Healthy Buildings 2012 - 10th International Conference

ISBN

978-1-921897-40-5

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

1-6

Název nakladatele

International Society of Indoor Air Quality and Climate - ISIAQ

Místo vydání

Santa Cruz

Místo konání akce

Brisbane

Datum konání akce

8. 7. 2012

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—