External Thermal Insulation Composite System and Problem with Biodegradation

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F16%3A00301804" target="_blank" >RIV/68407700:21110/16:00301804 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

External Thermal Insulation Composite System and Problem with Biodegradation

Popis výsledku v původním jazyce

The external thermal insulation composite systems (ETICS) are common used in the Central Europe since 90's. Nowadays the most of ETICS realized in the first run arc at the end of their service life. And it is necessaiy to renovate it and to design new ETICS with longer service life. Our study showed the problem with mold growth on the surface of ETICS related to using biocide during the whole life of building and the frequency of it. The mold is visible on the surface the façade but experiments showed the occurrence of mold to the other layer through ETICS. There were identified mold from surface of facades in towns in Czech Republic. There were also analysed the growth mold in the other layers of ETICS. The most identified mold were .4 Iternaria, cladosporium, Epicoccum, Penicillium, .4spergillus, Mucor, Aureohasidium, Acremonium etc. The growth of mold was selective respectively not all of occurred on surfaces are isolate in deeper layers of system. There was conducted a laboratory experiment where mold grew through layers of new prepared ETICS iii laboratory conditions. And there were tested the nanofiber textile as a protection against mold growth through ETICS.

Název v anglickém jazyce

External Thermal Insulation Composite System and Problem with Biodegradation

Popis výsledku anglicky

The external thermal insulation composite systems (ETICS) are common used in the Central Europe since 90's. Nowadays the most of ETICS realized in the first run arc at the end of their service life. And it is necessaiy to renovate it and to design new ETICS with longer service life. Our study showed the problem with mold growth on the surface of ETICS related to using biocide during the whole life of building and the frequency of it. The mold is visible on the surface the façade but experiments showed the occurrence of mold to the other layer through ETICS. There were identified mold from surface of facades in towns in Czech Republic. There were also analysed the growth mold in the other layers of ETICS. The most identified mold were .4 Iternaria, cladosporium, Epicoccum, Penicillium, .4spergillus, Mucor, Aureohasidium, Acremonium etc. The growth of mold was selective respectively not all of occurred on surfaces are isolate in deeper layers of system. There was conducted a laboratory experiment where mold grew through layers of new prepared ETICS iii laboratory conditions. And there were tested the nanofiber textile as a protection against mold growth through ETICS.

Druh

D - Stať ve sborníku

CEP obor

JN - Stavebnictví

OECD FORD obor

—

Projekt

<a href="/cs/project/TA04010837" target="_blank" >TA04010837: Vývoj nových materiálů a technologií pro údržbu a rekonstrukci budov s aplikovanými kontaktními tepelně - izolačními systémy obvodových plášťů (ETICS)</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Central Europe towards Sustainable Building 2016 - Innovations for Sustainable Future

ISBN

978-80-271-0248-8

ISSN

—

e-ISSN

—

Počet stran výsledku

2

Strana od-do

93-94

Název nakladatele

GRADA PUBLISHING

Místo vydání

Praha

Místo konání akce

Prague

Datum konání akce

22. 6. 2016

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—