A Study on the Possible Use of Sandstone Dust as Fine Aggregate in Mortar Mix Design

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F18%3A00322210" target="_blank" >RIV/68407700:21110/18:00322210 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.5593/sgem2018/6.3/S26.002" target="_blank" >http://dx.doi.org/10.5593/sgem2018/6.3/S26.002</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.5593/sgem2018/6.3/S26.002" target="_blank" >10.5593/sgem2018/6.3/S26.002</a>

Jazyk výsledku

angličtina

Název v původním jazyce

A Study on the Possible Use of Sandstone Dust as Fine Aggregate in Mortar Mix Design

Popis výsledku v původním jazyce

The stone dust coming from stone processing plant located in Ostroměř, Czech Republic, was examined in the presented paper as an alternative recyclable environment-friendly material which can be effectively being used in construction as partial replacement of natural sand. The tested dust is grey-brown colored and is a by-product of sandstone processing from quarry Podhorní Újezd. Before the characterization tests, the delivered stone dust was sieved on a certificate test sieve with a 0.25 mm mesh size. First, basic physical properties and particle size distribution of stone dust were tested. Chemical and mineralogical composition and morphology of stone dust were characterized using X-Ray fluorescence, X-Ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. The pozzolanic activity of stone dust was tested using both the Frattini and Chapelle tests. Then, the studied stone dust was used in composition of cement-based mortar in order to evaluate its effect on mortar mechanical resistance. In mortar composition, 25 mass% of natural sand was replaced with stone dust. Although the used stone dust was not pozzolana active, its incorporation into mortar mix led to the decrease in porosity and thus to the increase in mechanical parameters, such as compressive strength, flexural strength and dynamic Young’s moduli. Based on the obtained data, the researched stone dust was found to be prospective alternative material having great potential to replace natural sand in mortar mix design, whereas both environmental and financial benefits of its use are quite obvious.

Název v anglickém jazyce

A Study on the Possible Use of Sandstone Dust as Fine Aggregate in Mortar Mix Design

Popis výsledku anglicky

The stone dust coming from stone processing plant located in Ostroměř, Czech Republic, was examined in the presented paper as an alternative recyclable environment-friendly material which can be effectively being used in construction as partial replacement of natural sand. The tested dust is grey-brown colored and is a by-product of sandstone processing from quarry Podhorní Újezd. Before the characterization tests, the delivered stone dust was sieved on a certificate test sieve with a 0.25 mm mesh size. First, basic physical properties and particle size distribution of stone dust were tested. Chemical and mineralogical composition and morphology of stone dust were characterized using X-Ray fluorescence, X-Ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. The pozzolanic activity of stone dust was tested using both the Frattini and Chapelle tests. Then, the studied stone dust was used in composition of cement-based mortar in order to evaluate its effect on mortar mechanical resistance. In mortar composition, 25 mass% of natural sand was replaced with stone dust. Although the used stone dust was not pozzolana active, its incorporation into mortar mix led to the decrease in porosity and thus to the increase in mechanical parameters, such as compressive strength, flexural strength and dynamic Young’s moduli. Based on the obtained data, the researched stone dust was found to be prospective alternative material having great potential to replace natural sand in mortar mix design, whereas both environmental and financial benefits of its use are quite obvious.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20505 - Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics; filled composites)

Projekt

<a href="/cs/project/GA18-07332S" target="_blank" >GA18-07332S: Vlastnosti, trvanlivost a chování lehkých maltových směsí s minerálními plnivy</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

18th International Multidisciplinary Scientific Geoconference SGEM 2018 - Nano, Bio, Green ans Space - Technologies for a Sustainable Future

ISBN

978-619-7408-52-2

ISSN

1314-2704

e-ISSN

—

Počet stran výsledku

8

Strana od-do

11-18

Název nakladatele

STEF92 Technology Ltd.

Místo vydání

Sofia

Místo konání akce

Albena

Datum konání akce

30. 6. 2018

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—