RECOMMENDED PROCEDURE FOR HEADROOM DESIGN ACCORDING TO GEOMETRIC PARAMETERS OF BUILDING STRUCTURES

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F22%3A00361947" target="_blank" >RIV/68407700:21110/22:00361947 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.14311/AP.2022.62.0654" target="_blank" >https://doi.org/10.14311/AP.2022.62.0654</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.14311/AP.2022.62.0654" target="_blank" >10.14311/AP.2022.62.0654</a>

Jazyk výsledku

angličtina

Název v původním jazyce

RECOMMENDED PROCEDURE FOR HEADROOM DESIGN ACCORDING TO GEOMETRIC PARAMETERS OF BUILDING STRUCTURES

Popis výsledku v původním jazyce

The system of Czech technical standards for geometric accuracy assumes that the designer determines the functional geometric parameters for a specific building. By calculation, he verifies them in the so-called “geometric plan” in the project documentation. The functional geometric parameters should be determined primarily for critical elements, i.e. for structures whose geometric accuracy is important for the execution of subsequent works, such as technologies requiring high precision and specific structures. The assumption is that designers will incorporate variations in geometric accuracy primarily in the development of the spatial parameters of the structures, which should ensure that the dimensional requirements for the completed structures will be met. One of these parameters is headroom. The design of headroom must respect the minimum height requirements prescribed by legislation, and where appropriate, by technical standards. At the same time, the design must respect the technological possibilities of the construction of individual structures – geometric deviations. To comply with the dimensional requirements for the completed structures, the geometric accuracy deviations should be determined in accordance with the requirements of the technical standards for the execution of the individual parts of the building structures and/or for their design. The aim of this article is to establish a calculation procedure for determining the safe design clearance so that the requirements of the legislation are met after implementation. The increase is determined based on a calculation procedure of the limiting geometric deviations that may affect the resulting headroom.

Název v anglickém jazyce

RECOMMENDED PROCEDURE FOR HEADROOM DESIGN ACCORDING TO GEOMETRIC PARAMETERS OF BUILDING STRUCTURES

Popis výsledku anglicky

The system of Czech technical standards for geometric accuracy assumes that the designer determines the functional geometric parameters for a specific building. By calculation, he verifies them in the so-called “geometric plan” in the project documentation. The functional geometric parameters should be determined primarily for critical elements, i.e. for structures whose geometric accuracy is important for the execution of subsequent works, such as technologies requiring high precision and specific structures. The assumption is that designers will incorporate variations in geometric accuracy primarily in the development of the spatial parameters of the structures, which should ensure that the dimensional requirements for the completed structures will be met. One of these parameters is headroom. The design of headroom must respect the minimum height requirements prescribed by legislation, and where appropriate, by technical standards. At the same time, the design must respect the technological possibilities of the construction of individual structures – geometric deviations. To comply with the dimensional requirements for the completed structures, the geometric accuracy deviations should be determined in accordance with the requirements of the technical standards for the execution of the individual parts of the building structures and/or for their design. The aim of this article is to establish a calculation procedure for determining the safe design clearance so that the requirements of the legislation are met after implementation. The increase is determined based on a calculation procedure of the limiting geometric deviations that may affect the resulting headroom.

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20101 - Civil engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2022

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Acta Polytechnica

ISSN

1210-2709

e-ISSN

1805-2363

Svazek periodika

Vol. 62

Číslo periodika v rámci svazku

No. 6

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

6

Strana od-do

654-659

Kód UT WoS článku

—

EID výsledku v databázi Scopus

2-s2.0-85147976023