Comparison of the corrosion resistance of zinc coatings obtained in baths with the addition of Al, Ni, Pb, Bi and Sn
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21220%2F22%3A00360550" target="_blank" >RIV/68407700:21220/22:00360550 - isvavai.cz</a>
Výsledek na webu
<a href="https://doi.org/10.15199/40.2022.7.1" target="_blank" >https://doi.org/10.15199/40.2022.7.1</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.15199/40.2022.7.1" target="_blank" >10.15199/40.2022.7.1</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Comparison of the corrosion resistance of zinc coatings obtained in baths with the addition of Al, Ni, Pb, Bi and Sn
Popis výsledku v původním jazyce
The article presents the results of research on the influence of Al, Ni, Pb, Bi and Sn additives in a zinc bath on the microstructure and corrosion resistance of zinc coatings. The microstructure at high magnifications (SEM) was revealed on the surface and cross-section of the coatings, and the chemical composition in micro-regions was determined. The corrosion resistance of the coatings was tested comparatively in neutral salt spray (PN EN ISO 9227) and in a humid atmosphere containing sulfur compounds (PN EN ISO 6988). The electrochemical corrosion parameters of the coatings were determined. It was found that the coatings obtained in the baths containing Pb, Bi and BiSn additives showed lower corrosion resistance compared to the coatings obtained in the Zn-AlNi bath. The microstructural tests showed the occurrence of Pb, Bi and BiSn alloy precipitates in the coating. These precipitates have a more electropositive potential in relation to zinc, which favors the formation of additional corrosion cells.
Název v anglickém jazyce
Comparison of the corrosion resistance of zinc coatings obtained in baths with the addition of Al, Ni, Pb, Bi and Sn
Popis výsledku anglicky
The article presents the results of research on the influence of Al, Ni, Pb, Bi and Sn additives in a zinc bath on the microstructure and corrosion resistance of zinc coatings. The microstructure at high magnifications (SEM) was revealed on the surface and cross-section of the coatings, and the chemical composition in micro-regions was determined. The corrosion resistance of the coatings was tested comparatively in neutral salt spray (PN EN ISO 9227) and in a humid atmosphere containing sulfur compounds (PN EN ISO 6988). The electrochemical corrosion parameters of the coatings were determined. It was found that the coatings obtained in the baths containing Pb, Bi and BiSn additives showed lower corrosion resistance compared to the coatings obtained in the Zn-AlNi bath. The microstructural tests showed the occurrence of Pb, Bi and BiSn alloy precipitates in the coating. These precipitates have a more electropositive potential in relation to zinc, which favors the formation of additional corrosion cells.
Klasifikace
Druh
J<sub>SC</sub> - Článek v periodiku v databázi SCOPUS
CEP obor
—
OECD FORD obor
20506 - Coating and films
Návaznosti výsledku
Projekt
—
Návaznosti
S - Specificky vyzkum na vysokych skolach
Ostatní
Rok uplatnění
2022
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Ochrona przed korozja
ISSN
0473-7733
e-ISSN
—
Svazek periodika
65
Číslo periodika v rámci svazku
7
Stát vydavatele periodika
PL - Polská republika
Počet stran výsledku
13
Strana od-do
203-215
Kód UT WoS článku
000835363500001
EID výsledku v databázi Scopus
2-s2.0-85135457499