Implantable Mechanical Circulatory Support Device in the Left Atrium

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21230%2F09%3A00163958" target="_blank" >RIV/68407700:21230/09:00163958 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Implantable Mechanical Circulatory Support Device in the Left Atrium

Popis výsledku v původním jazyce

New solution for mechanical circulatory support combines the principle of balloon inflation and deflation with mechanical valves. The system consists of a pump, a pressure cable and console. A pump placed in the left atrium, consists of a pump casing, four input tubes and one output tube. The input tubes are directed to the pulmonary veins, while the output tube extends through the mitral valve annulus into the left ventricle. The pump is filled through the input valves in the input tubes while the balloon is deflated by vacuum generated by the compressor and transferred through the hollow, closed system. The output valve in the output tube is closed inside the pump casing when the pressure drops. The pump is emptied through the output valve in the output tube by the balloon inflating under pressure generated by a compressor through the hollow, closed system via the pressure cable. The input valves in the input tubes are closed by pressure within the pump casing

Název v anglickém jazyce

Implantable Mechanical Circulatory Support Device in the Left Atrium

Popis výsledku anglicky

New solution for mechanical circulatory support combines the principle of balloon inflation and deflation with mechanical valves. The system consists of a pump, a pressure cable and console. A pump placed in the left atrium, consists of a pump casing, four input tubes and one output tube. The input tubes are directed to the pulmonary veins, while the output tube extends through the mitral valve annulus into the left ventricle. The pump is filled through the input valves in the input tubes while the balloon is deflated by vacuum generated by the compressor and transferred through the hollow, closed system. The output valve in the output tube is closed inside the pump casing when the pressure drops. The pump is emptied through the output valve in the output tube by the balloon inflating under pressure generated by a compressor through the hollow, closed system via the pressure cable. The input valves in the input tubes are closed by pressure within the pump casing

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

EI - Biotechnologie a bionika

OECD FORD obor

—

Projekt

—

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2009

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

The International Journal of Artificial Organs

ISSN

1724-6040

e-ISSN

—

Svazek periodika

32

Číslo periodika v rámci svazku

7

Stát vydavatele periodika

IT - Italská republika

Počet stran výsledku

1

Strana od-do

—

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—