Effect of Wood Flour Loading and Thermal Annealing on Viscoelastic Properties of Poly(lactic acid)

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28110%2F10%3A63509403" target="_blank" >RIV/70883521:28110/10:63509403 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Effect of Wood Flour Loading and Thermal Annealing on Viscoelastic Properties of Poly(lactic acid)

Popis výsledku v původním jazyce

Poly(lactic acid) (PLA) films filled with up to 50 wt % softwood flour were prepared by melt compounding and thermocompression. Thermal annealing of the melt was performed at temperatures from 90 C to 120 C, for 45 min. Responses on polymer-filler interactions, viscoelastic properties, crystallinity of PLA as well as PLA-wood flour-filled films were investigated by differential scanning kalorimetry (DSC), dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM). The effectiveness of fillers on the storage moduli (C) was also calculated. The results reveal that wood flour (WF) in conjunction with thermal annealing affected the melting behavior of PLA matrix, and the glass transition temperature. It was further found that the effectiveness of the wood filler in biocomposites widely improved with thermal annealing as well as with higher WF concentration. Finally, it was found that the compatibility between WF and the PLA matrix can be improved when suitable annealing cond

Název v anglickém jazyce

Effect of Wood Flour Loading and Thermal Annealing on Viscoelastic Properties of Poly(lactic acid)

Popis výsledku anglicky

Poly(lactic acid) (PLA) films filled with up to 50 wt % softwood flour were prepared by melt compounding and thermocompression. Thermal annealing of the melt was performed at temperatures from 90 C to 120 C, for 45 min. Responses on polymer-filler interactions, viscoelastic properties, crystallinity of PLA as well as PLA-wood flour-filled films were investigated by differential scanning kalorimetry (DSC), dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM). The effectiveness of fillers on the storage moduli (C) was also calculated. The results reveal that wood flour (WF) in conjunction with thermal annealing affected the melting behavior of PLA matrix, and the glass transition temperature. It was further found that the effectiveness of the wood filler in biocomposites widely improved with thermal annealing as well as with higher WF concentration. Finally, it was found that the compatibility between WF and the PLA matrix can be improved when suitable annealing cond

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

CD - Makromolekulární chemie

OECD FORD obor

—

Projekt

<a href="/cs/project/MEB060908" target="_blank" >MEB060908: Studie nových biokompozitních materiálů na bázi polylaktidu a dřevní moučky</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2010

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Journal of Applied Polymer Science

ISSN

0021-8995

e-ISSN

—

Svazek periodika

118

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

US - Spojené státy americké

Počet stran výsledku

6

Strana od-do

—

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—