The effect of moisture on laser beam wood machining

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28110%2F24%3A63580898" target="_blank" >RIV/70883521:28110/24:63580898 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

The effect of moisture on laser beam wood machining

Popis výsledku v původním jazyce

Wood moisture can affect various parameters of the engraving process, such as the depth of engraving, the structure and surface of the wood, and thus the overall quality of the created image. The investigation of the influence of moisture contained in different types of wood on their machining was carried out on samples of oak, beech, pine, spruce, alder, ash and cherry produced using the laser device ILS 3NM, CO2, with a wavelength of 10.6 μm and a maximum power 100 W, with a maximum feed speed of 1524 mms−1. The depth of ablation and the surface of the machined surface were studied for selected samples with the moisture of the wood plants in the laboratory room, the outdoor and with the moisture created by immersion in the water bath.

Název v anglickém jazyce

The effect of moisture on laser beam wood machining

Popis výsledku anglicky

Wood moisture can affect various parameters of the engraving process, such as the depth of engraving, the structure and surface of the wood, and thus the overall quality of the created image. The investigation of the influence of moisture contained in different types of wood on their machining was carried out on samples of oak, beech, pine, spruce, alder, ash and cherry produced using the laser device ILS 3NM, CO2, with a wavelength of 10.6 μm and a maximum power 100 W, with a maximum feed speed of 1524 mms−1. The depth of ablation and the surface of the machined surface were studied for selected samples with the moisture of the wood plants in the laboratory room, the outdoor and with the moisture created by immersion in the water bath.

Druh

O - Ostatní výsledky

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2024

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů