The effect of moisture on laser beam wood machining
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28110%2F24%3A63582358" target="_blank" >RIV/70883521:28110/24:63582358 - isvavai.cz</a>
Výsledek na webu
<a href="https://iopscience.iop.org/article/10.1088/1742-6596/2931/1/012005" target="_blank" >https://iopscience.iop.org/article/10.1088/1742-6596/2931/1/012005</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.1088/1742-6596/2931/1/012005" target="_blank" >10.1088/1742-6596/2931/1/012005</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
The effect of moisture on laser beam wood machining
Popis výsledku v původním jazyce
"Wood moisture can affect various parameters of the engraving process, such as the depth of engraving, the structure and surface of the wood, and thus the overall quality of the created image. The investigation of the influence of moisture contained in different types of wood on their machining was carried out on samples of oak, beech, pine, spruce, alder, ash and cherry produced using the laser device ILS 3NM, CO2, with a wavelength of 10.6 μm and a maximum power 100 W, with a maximum feed speed of 1524 mm·s""1. The depth of ablation and the surface of the machined surface were studied for selected samples with the moisture of the wood plants in the laboratory room, the outdoor and with the moisture created by immersion in the water bath."
Název v anglickém jazyce
The effect of moisture on laser beam wood machining
Popis výsledku anglicky
"Wood moisture can affect various parameters of the engraving process, such as the depth of engraving, the structure and surface of the wood, and thus the overall quality of the created image. The investigation of the influence of moisture contained in different types of wood on their machining was carried out on samples of oak, beech, pine, spruce, alder, ash and cherry produced using the laser device ILS 3NM, CO2, with a wavelength of 10.6 μm and a maximum power 100 W, with a maximum feed speed of 1524 mm·s""1. The depth of ablation and the surface of the machined surface were studied for selected samples with the moisture of the wood plants in the laboratory room, the outdoor and with the moisture created by immersion in the water bath."
Klasifikace
Druh
D - Stať ve sborníku
CEP obor
—
OECD FORD obor
20301 - Mechanical engineering
Návaznosti výsledku
Projekt
—
Návaznosti
S - Specificky vyzkum na vysokych skolach
Ostatní
Rok uplatnění
2024
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název statě ve sborníku
Journal of Physics: Conference Series
ISBN
—
ISSN
1742-6588
e-ISSN
1742-6596
Počet stran výsledku
13
Strana od-do
—
Název nakladatele
Institute of Physics Publishing Ltd.
Místo vydání
Bristol
Místo konání akce
Tatranská Štrba
Datum konání akce
9. 9. 2024
Typ akce podle státní příslušnosti
EUR - Evropská akce
Kód UT WoS článku
—