Tensile Behavior of Recycled Irradiated HDPE

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28140%2F13%3A43869954" target="_blank" >RIV/70883521:28140/13:43869954 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/70883521:28110/13:43869954

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Tensile Behavior of Recycled Irradiated HDPE

Popis výsledku v původním jazyce

Irradiation of thermoplastics is a well - known modification used for improving cheap commodity plastics; however, little research was carried - out on recyclation of such modified materials. This research paper gives possible solution of utilization ofrecycled irradiated high - density polyethylene (HDPE). A powder of recycled irradiated HDPE was used as filler into a powder of pure low- density polyethylene (LDPE) and tensile test was performed. Materials were mixed together in concentrations from 10to 60 % of the filler and injection molded to produce test specimens. Tensile test was performed at ambient - 23 °C and elevated - 80 °C temperatures. Among observed results were Ultimate Tensile Strength and Nominal Strain to determine tensile behaviorand to describe influence of the filler on this behavior. Measured results at ambient temperature show that there is a growth of Ultimate Tensile Strength from 10 MPa to 15 MPa and on the contrary there is a drop in Nominal Strain from 6

Název v anglickém jazyce

Tensile Behavior of Recycled Irradiated HDPE

Popis výsledku anglicky

Irradiation of thermoplastics is a well - known modification used for improving cheap commodity plastics; however, little research was carried - out on recyclation of such modified materials. This research paper gives possible solution of utilization ofrecycled irradiated high - density polyethylene (HDPE). A powder of recycled irradiated HDPE was used as filler into a powder of pure low- density polyethylene (LDPE) and tensile test was performed. Materials were mixed together in concentrations from 10to 60 % of the filler and injection molded to produce test specimens. Tensile test was performed at ambient - 23 °C and elevated - 80 °C temperatures. Among observed results were Ultimate Tensile Strength and Nominal Strain to determine tensile behaviorand to describe influence of the filler on this behavior. Measured results at ambient temperature show that there is a growth of Ultimate Tensile Strength from 10 MPa to 15 MPa and on the contrary there is a drop in Nominal Strain from 6

Druh

D - Stať ve sborníku

CEP obor

JP - Průmyslové procesy a zpracování

OECD FORD obor

—

Projekt

<a href="/cs/project/ED2.1.00%2F03.0089" target="_blank" >ED2.1.00/03.0089: Centrum bezpečnostních, informačních a pokročilých technologií (CEBIA-Tech)</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2013

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Recent, Advances in Automatic Control, Information and Communications 14th International Conference on Automation and Information (ICAI´13) 13th International Conference on Applied Informatics and Communications (AIC´13)

ISBN

978-960-474-316-2

ISSN

1790-5117

e-ISSN

—

Počet stran výsledku

4

Strana od-do

115-118

Název nakladatele

WSEAS World Science and Engineering Academy and Science

Místo vydání

Atény

Místo konání akce

Valencie

Datum konání akce

6. 8. 2013

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—