Properties of LDPE with the Filler of Recycled Irradiated HDPE

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F70883521%3A28140%2F13%3A43869960" target="_blank" >RIV/70883521:28140/13:43869960 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/70883521:28110/13:43869960

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Properties of LDPE with the Filler of Recycled Irradiated HDPE

Popis výsledku v původním jazyce

Irradiation of thermoplastics is a well - known modification used for improving of cheap commodity plastics; however, little research was carried - out on recyclation of such modified materials. This research paper gives possible solution of utilizationof recycled irradiated high - density polyethylene (HDPE). A powder of recycled irradiated HDPE was used as filler into pure low- density polyethylene (LDPE) and tensile test was performed. Materials were mixed together in concentrations from 10 to 60 %of the filler and injection molded to produce test pecimens. Tensile test was performed at ambient ? 23°C temperatures. Observed results were Young´s Modulus and Ultimate Ten sile Strength to determine tensile behavior and to describe influence of the filler on this behavior. Findings from this research work could help to solve problems with the utilization of irradiation cross - linked PE in the end of its lifetime.

Název v anglickém jazyce

Properties of LDPE with the Filler of Recycled Irradiated HDPE

Popis výsledku anglicky

Irradiation of thermoplastics is a well - known modification used for improving of cheap commodity plastics; however, little research was carried - out on recyclation of such modified materials. This research paper gives possible solution of utilizationof recycled irradiated high - density polyethylene (HDPE). A powder of recycled irradiated HDPE was used as filler into pure low- density polyethylene (LDPE) and tensile test was performed. Materials were mixed together in concentrations from 10 to 60 %of the filler and injection molded to produce test pecimens. Tensile test was performed at ambient ? 23°C temperatures. Observed results were Young´s Modulus and Ultimate Ten sile Strength to determine tensile behavior and to describe influence of the filler on this behavior. Findings from this research work could help to solve problems with the utilization of irradiation cross - linked PE in the end of its lifetime.

Druh

D - Stať ve sborníku

CEP obor

JP - Průmyslové procesy a zpracování

OECD FORD obor

—

Projekt

<a href="/cs/project/ED2.1.00%2F03.0089" target="_blank" >ED2.1.00/03.0089: Centrum bezpečnostních, informačních a pokročilých technologií (CEBIA-Tech)</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2013

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Recent, Advances in Automatic Control, Information and Communications 14th International Conference on Automation and Information (ICAI´13) 13th International Conference on Applied Informatics and Communications (AIC´13)

ISBN

978-960-474-316-2

ISSN

1790-5117

e-ISSN

—

Počet stran výsledku

4

Strana od-do

123-126

Název nakladatele

WSEAS World Science and Engineering Academy and Science

Místo vydání

Atény

Místo konání akce

Valencie

Datum konání akce

6. 8. 2013

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—