Analysis of surface and subsurface layers after WEDM for Ti-6Al-4V with heat treatment

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26210%2F18%3APU124797" target="_blank" >RIV/00216305:26210/18:PU124797 - isvavai.cz</a>

Výsledek na webu

<a href="http://www.sciencedirect.com/science/article/pii/S0263224117307625" target="_blank" >http://www.sciencedirect.com/science/article/pii/S0263224117307625</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.measurement.2017.11.053" target="_blank" >10.1016/j.measurement.2017.11.053</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Analysis of surface and subsurface layers after WEDM for Ti-6Al-4V with heat treatment

Popis výsledku v původním jazyce

The effective machining using the technology of wire electrical discharge machining (WEDM) is a compromise between cutting speed and resulting surface quality. The typical morphology of a machined surface using electrical erosion is characterised with numerous craters due to electrical discharges arising during the process of cutting. The study deals with the assessment of the influence of parameters of machine settings and material heat treatment on both quantitative and qualitative evaluations of craters on the surface of workpieces made ofTi-6Al-4V alloy. Using metallographic investigation, the diffusion subsurface phenomena occurring during the process of cutting on cross sections of preparationshave been studied , and both qualitative and quantitative evaluations of the amount of electrode material stuck on the machined surface have been made. Diffusion processes occurring between the electrode and the cut material have been studied on cut surfaces as well as on cross sections using local spot EDX microanalysis.

Název v anglickém jazyce

Analysis of surface and subsurface layers after WEDM for Ti-6Al-4V with heat treatment

Popis výsledku anglicky

The effective machining using the technology of wire electrical discharge machining (WEDM) is a compromise between cutting speed and resulting surface quality. The typical morphology of a machined surface using electrical erosion is characterised with numerous craters due to electrical discharges arising during the process of cutting. The study deals with the assessment of the influence of parameters of machine settings and material heat treatment on both quantitative and qualitative evaluations of craters on the surface of workpieces made ofTi-6Al-4V alloy. Using metallographic investigation, the diffusion subsurface phenomena occurring during the process of cutting on cross sections of preparationshave been studied , and both qualitative and quantitative evaluations of the amount of electrode material stuck on the machined surface have been made. Diffusion processes occurring between the electrode and the cut material have been studied on cut surfaces as well as on cross sections using local spot EDX microanalysis.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

MEASUREMENT, Journal of the International Measurement Confederation (IMEKO)

ISSN

0263-2241

e-ISSN

1873-412X

Svazek periodika

2018

Číslo periodika v rámci svazku

116

Stát vydavatele periodika

GB - Spojené království Velké Británie a Severního Irska

Počet stran výsledku

9

Strana od-do

556-564

Kód UT WoS článku

000430452700060

EID výsledku v databázi Scopus

2-s2.0-85035794693