Impact of residual carbon after DLP and SPS-Sintering on compressive strength and in-VITRO bioactivity of calcium phosphate scaffolds

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F00216305%3A26620%2F22%3APU145438" target="_blank" >RIV/00216305:26620/22:PU145438 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.sciencedirect.com/science/article/pii/S2666539522000645?via%3Dihub" target="_blank" >https://www.sciencedirect.com/science/article/pii/S2666539522000645?via%3Dihub</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.oceram.2022.100281" target="_blank" >10.1016/j.oceram.2022.100281</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Impact of residual carbon after DLP and SPS-Sintering on compressive strength and in-VITRO bioactivity of calcium phosphate scaffolds

Popis výsledku v původním jazyce

Digital Light Processing was used to fabricate bioactive ceramic scaffolds for bone regeneration using β-tricalcium phosphate (β-TCP) powder as a starting material. The 3D structures were de-binded in vacuum and divided in two batches: Carbon Containing samples and Carbon Free samples (obtained by firing at 750 °C in air after de-binding). All samples were then sintered in pressure-less SPS either at 1200 °C or 1500 °C, resulting in two different polymorphs (β and α -TCP). The influence of the de-binding method, the in-situ formation of a carbonaceous phase and different phase composition of resulting scaffolds was evaluated in terms of mechanical performance and in vitro bioactivity and solubility in simulated body fluid (SBF). All scaffolds exhibited compressive strengths within the range of cancellous bone and bone-like apatite precipitates were visible on their surface after 21 days of immersion in SBF, with the exception of carbon-free samples sintered at 1200 °C.

Název v anglickém jazyce

Impact of residual carbon after DLP and SPS-Sintering on compressive strength and in-VITRO bioactivity of calcium phosphate scaffolds

Popis výsledku anglicky

Digital Light Processing was used to fabricate bioactive ceramic scaffolds for bone regeneration using β-tricalcium phosphate (β-TCP) powder as a starting material. The 3D structures were de-binded in vacuum and divided in two batches: Carbon Containing samples and Carbon Free samples (obtained by firing at 750 °C in air after de-binding). All samples were then sintered in pressure-less SPS either at 1200 °C or 1500 °C, resulting in two different polymorphs (β and α -TCP). The influence of the de-binding method, the in-situ formation of a carbonaceous phase and different phase composition of resulting scaffolds was evaluated in terms of mechanical performance and in vitro bioactivity and solubility in simulated body fluid (SBF). All scaffolds exhibited compressive strengths within the range of cancellous bone and bone-like apatite precipitates were visible on their surface after 21 days of immersion in SBF, with the exception of carbon-free samples sintered at 1200 °C.

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20504 - Ceramics

Projekt

<a href="/cs/project/LM2018110" target="_blank" >LM2018110: Výzkumná infrastruktura CzechNanoLab</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2022

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Open Ceramics

ISSN

2666-5395

e-ISSN

—

Svazek periodika

11

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

NL - Nizozemsko

Počet stran výsledku

9

Strana od-do

„100281-1“-„100281-9“

Kód UT WoS článku

—

EID výsledku v databázi Scopus

2-s2.0-85132443214