SMR core thermal hydraulic experiments and code validation with the MOTEL test facility

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46356088%3A_____%2F25%3AN0000021" target="_blank" >RIV/46356088:_____/25:N0000021 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.sciencedirect.com/science/article/pii/S002954932500233X" target="_blank" >https://www.sciencedirect.com/science/article/pii/S002954932500233X</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.nucengdes.2025.114056" target="_blank" >10.1016/j.nucengdes.2025.114056</a>

Jazyk výsledku

angličtina

Název v původním jazyce

SMR core thermal hydraulic experiments and code validation with the MOTEL test facility

Popis výsledku v původním jazyce

Thermal hydraulic experiments with the modular integral test facility, MOTEL, were performed as a part of the European McSAFER research project. The facility models an integral pressure water small modular reactor (SMR) with a helical steam generator and a core with separate heater rod groups, in which power can be individually controlled. Different asymmetric and ring-shaped radial core power distributions were imposed in the experiments to provoke cross flows in the buoyancy-driven coolant flow. The purpose of the experiments was to produce new SMR-relevant data for the validation of computational fluid dynamic (CFD) and thermal-hydraulic subchannel codes. The experimental measurements revealed cross flow mixing effects, mainly in the top part of the core. Obtaining visible differences in the fluid temperature measurements between different heater regions required significant power gradients between the regions. CFD simulations were performed using ANSYS CFX with a detailed model comprising the whole primary side of the facility, and additional investigations were conducted with a stand-alone model of the heat exchanger. Good agreement with the measurements was obtained with the CFD simulations, which also revealed further details of the core flow characteristics in an asymmetric heating case. Furthermore, simulations with the subchannel codes, CTF and VIPRE-01, were performed. The simulations with CTF highlighted the code's capability to handle flow rates typical to natural circulation driven SMRs, as the results agreed well with the experiments and were able to predict the correct axial temperature profiles in the different regions of the core. VIPRE-01 solution stability was found to be highly sensitive to the flow rate, the power level, and the axial nodalization. Simulations with VIPRE-01 ended unsuccessfully due to convergence issues, and it was concluded that the conditions of the experiments are beyond the current capabilities of the code.

Název v anglickém jazyce

SMR core thermal hydraulic experiments and code validation with the MOTEL test facility

Popis výsledku anglicky

Thermal hydraulic experiments with the modular integral test facility, MOTEL, were performed as a part of the European McSAFER research project. The facility models an integral pressure water small modular reactor (SMR) with a helical steam generator and a core with separate heater rod groups, in which power can be individually controlled. Different asymmetric and ring-shaped radial core power distributions were imposed in the experiments to provoke cross flows in the buoyancy-driven coolant flow. The purpose of the experiments was to produce new SMR-relevant data for the validation of computational fluid dynamic (CFD) and thermal-hydraulic subchannel codes. The experimental measurements revealed cross flow mixing effects, mainly in the top part of the core. Obtaining visible differences in the fluid temperature measurements between different heater regions required significant power gradients between the regions. CFD simulations were performed using ANSYS CFX with a detailed model comprising the whole primary side of the facility, and additional investigations were conducted with a stand-alone model of the heat exchanger. Good agreement with the measurements was obtained with the CFD simulations, which also revealed further details of the core flow characteristics in an asymmetric heating case. Furthermore, simulations with the subchannel codes, CTF and VIPRE-01, were performed. The simulations with CTF highlighted the code's capability to handle flow rates typical to natural circulation driven SMRs, as the results agreed well with the experiments and were able to predict the correct axial temperature profiles in the different regions of the core. VIPRE-01 solution stability was found to be highly sensitive to the flow rate, the power level, and the axial nodalization. Simulations with VIPRE-01 ended unsuccessfully due to convergence issues, and it was concluded that the conditions of the experiments are beyond the current capabilities of the code.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20305 - Nuclear related engineering; (nuclear physics to be 1.3);

Projekt

—

Návaznosti

R - Projekt Ramcoveho programu EK

Rok uplatnění

2025

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Nuclear Engineering and Design

ISSN

0029-5493

e-ISSN

1872-759X

Svazek periodika

439

Číslo periodika v rámci svazku

August

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

13

Strana od-do

1-13

Kód UT WoS článku

001478885000001

EID výsledku v databázi Scopus

2-s2.0-105003121534